OP
OP
I didn't want @Nex 's fōotfetish to hinder thisHey, thanks for not including your feet in Birkenstocks in any of the pics. Hats off to you! Nice write up.
Blower Motor Vibrates the cab, Blend Door Broke, DIY fix it
- Thread starter MurderedOutSVT
- Start date
-
- Tags
- blend door blower motor
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
GCATX
King Dingaling
He's is probably cutting himself right now.
Nex
RIP CoronaRaptor
OP
OP
castine917
Full Access Member
I did a zip tie through some sort of a cross hatch of plastic and around door so I didn't have to worry too much about something else falling down into my fan again. Then eventually I had the door replaced when the dash came out for the clicking actuators and heater core.
Oldfart
FRF Addict
"You can fist your blower hole and feel the blend door in there, it'll rock forward and backward opening the fresh air/recirc mode."
So when you "fist your blower hole", is this a pleasurable sensation? Asking for a friend.
So when you "fist your blower hole", is this a pleasurable sensation? Asking for a friend.
Last edited:
Ok...... I think this might be the problem I have. @MurderedOutSVT Dose it sound like a 747 is flying over the truck? and the dash is about to shake a part? If so......... I know my next project.
OP
OP
Yep.... thats a good decription.
Its really not a hard fix, but the upside down and backwards act under the dash and the one click at a time ratcheting is what sucks. You can get away without jamming the freshair vent closed, it will work fine
Similar threads
