Official Raptor R Modification Thread

[Hard R]

Just finished installing the White Knuckles rock sliders. Opted for the heavy duty .188"x1 3/4 DOM outer rub rail. I already bashed my stock running boards a bit so these are a nice replacement.

 

[BoostCreep]

Just finished installing the White Knuckles rock sliders. Opted for the heavy duty .188"x1 3/4 DOM outer rub rail. I already bashed my stock running boards a bit so these are a nice replacement.

Those look nice! Do they still work well as a step to pass the wife test?

 

[Hard R]

Those look nice! Do they still work well as a step to pass the wife test?

Absolutely. I don't notice a difference in size getting in or out. It definitely doesn't flex or vibrate like the stock boards.

 

[BadWRP]

Innov8s & M26 Engineering 1.25” collars installed. Rides slightly stiffer than stock. Barely noticeable, will probably smooth out after live valve recalibration.

Update: Rides like stock after re-calibration

 

[ToadSmasher2K1]

Innov8s & M26 Engineering 1.25” collars installed. Rides slightly stiffer than stock. Barely noticeable, will probably smoothen out after live valve recalibration.

+6 offset?

 

[BadWRP]

+6 offset?

Yes sir. 5” back spacing

 

[BadWRP]

Spe carbon intake. Install was quick. Sc whines more than the FP filter with the lid off. Pulls harder on the big end. The stock intake is definitely restricting these engines from breathing.