New tires

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sonicsunspot

FRF Supporting Member
Supporting Member
Joined
Jan 1, 2020
Posts
416
Reaction score
513
Location
KC
I have a 2018 802a, got 38k from the stock K02s but they were noisy at about 75dBA at 75mph. So I went with Nitto Ridge Grapplers. Love them, noise dropped by about 5dBA. They look aggressive and off road and on good performance.
So hard to to compare an “old tire” at 38k miles with a new tire, but I really have been happy with the Nittos.
They ran me about $1100 at my Ford dealer.
 

Mister Pinky

Full Access Member
Joined
May 25, 2020
Posts
638
Reaction score
607
Location
OH
has anyone tried the Toyo AT III's? i'm debating between the AT III or RT's

Depends on your purpose. I’ve used the older AT2s which were a very good tire, but neither is as aggressive or as useful as the BFG in the conditions the Raptor was built for.

The RTs on the other hand... No experience with them but they look dramatic.
 

P4mnceBlue82

Full Access Member
Joined
Aug 11, 2019
Posts
215
Reaction score
151
Location
West Virginia
Discount tire direct has a flash sale right now. 100.00 off plus rebate. I have a 19' with 12k miles. My KO's are wearing very uneven. I run 36 front and 34 rear cold psi. Rotate every 5k. But the centers are down to 7/32's with edges at 12/32's. Hard to believe. Cuz that indicates over inflation i dont feel 36/34 is over inflated. Considering switching to yokohama x-at or goodyear ultraterrain. Can't decide.
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,509
Reaction score
26,930
I run 36 front and 34 rear cold psi. Rotate every 5k. But the centers are down to 7/32's with edges at 12/32's. Hard to believe. Cuz that indicates over inflation i dont feel 36/34 is over inflated. Considering switching to yokohama x-at or goodyear ultraterrain. Can't decide.

something isn’t right. I mostly run 38/37 F/R, and I am planning on dropping a few psi for better compliance but I’ve been hauling some cargo lately.

running those pressures shouldn’t wear the middle of the tire more... I wouldn’t think.

A point of clarification: how are you measuring, and if by TPMS, have you compared to a known, good gauge?
 

P4mnceBlue82

Full Access Member
Joined
Aug 11, 2019
Posts
215
Reaction score
151
Location
West Virginia
Well I regularly check tpms but also have a really nice snap on shop gauge that is maybe 1psi off from tpms.

I agree something isn't right. Im pretty OCD with my tires. I havent been overly impressed with these KO's anyway. So it won't hurt my feeling to buy a new set of tires. The only thing I'm concerned about is jumping to E rated tire. I've only ran E's on one other 1/2 ton and wasn't a very pleasant experience. Rode like buggy with wooden wheels.

I did see where the new toyo AT3 comes in a 315/70/17 C2. Looks like they designed something specifically for us! But I am a big fan of yokohama and really like these new x-at's. They did a lot of testing with these on our raptors specifically.
 

Badgertits

FRF Addict
Joined
Jan 24, 2019
Posts
2,803
Reaction score
2,445
Location
Ma
Well I regularly check tpms but also have a really nice snap on shop gauge that is maybe 1psi off from tpms.

I agree something isn't right. Im pretty OCD with my tires. I havent been overly impressed with these KO's anyway. So it won't hurt my feeling to buy a new set of tires. The only thing I'm concerned about is jumping to E rated tire. I've only ran E's on one other 1/2 ton and wasn't a very pleasant experience. Rode like buggy with wooden wheels.

I did see where the new toyo AT3 comes in a 315/70/17 C2. Looks like they designed something specifically for us! But I am a big fan of yokohama and really like these new x-at's. They did a lot of testing with these on our raptors specifically.

how much do those AT3s weigh relative to KO2?
 

Jtnuge

Full Access Member
Joined
Feb 14, 2017
Posts
487
Reaction score
133
You guys might want to look into Mickey Thompson's ATZ P3. Load range D. I'm thinking of these, my factory ones are done at 32,300 centers are gone. 36-38 psi since new. Not to pleased with my first set of BFG'S. Local tire shop 230.00 each for the Mickey Thompson's.
 
Top