MUST DO MODS/UPGRADES for GEN2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
E

Easyrider470

Member
Joined
Jul 22, 2023
Posts
32
Reaction score
6
Location
Colorado
Id say matte finish PPf followed by a lengthy photoshoot & post to frf on a fresh thread.
@thatJeepguy I have considered the matte finish PPF. I have done that on other vehicles and the maintenance is easy as pie, especially in my area with the snow and junk half the year. I am just not sure I want to spend much of any money on this thing that doesn't make it better. It's 4 years old and while I really like it, i'm not sure i care if it gets rock chips on the front end.
 

2020Raptor

Full Access Member
Joined
Feb 11, 2020
Posts
322
Reaction score
157
Location
South Central...NJ
Cobb tune, real lug nuts, Hellwig rear sway bar, and a BD S8 behind-the-grill light bar.
I have the Cobb AP and S8 from my 2020 will have for sale shortly if you want preowned.
1736456598767.png
 

ThePaintPirate

Active Member
Joined
Jul 27, 2024
Posts
112
Reaction score
193
Location
SE Iowa
I just run a basic Cobb tune with the Accessport. I’m sure it’s not as good as Goose, but it’s way better than stock. I didn’t even opt for the transmission tuning either. I guess what I’m getting at is just the basic stuff that comes with the AP is a big improvement if that’s all you want to dump into it.
Cobb ECU and TCU tune, rear wheel well cover, gorilla lugs, and updated from Sync 2 to Sync 3 is all I've done as far as "mods" go.
 
Top