Missing FOX 3.0 Part

[t_j]

Holy **** Batman, where have you been all this past hour while I was stressing out over this piece of metal, digging through my local dumpster trying to find it. do you have any more?

Nope, and these are Icon parts. If you send me a fox one I can replicate it, however you'd probably be able to find a vendor who can get you one before I can turn you one and ship them back.

If you're having no luck, try Race Ready Products, I have had good service from them for fox items in the past.

 

[Aaron]

Kartek might be another shop to try for these parts.

 

[RPG]

Give us a call at the shop for the FOX Parts.. We will not have the Icon parts in Stock.

---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------

Yep:

Hey Hey,

Do you have any 17-4 ph 900, 303 or 304 SS instead?

 

[t_j]

Give us a call at the shop for the FOX Parts.. We will not have the Icon parts in Stock.

---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------




Hey Hey,

Do you have any 17-4 ph 900, 303 or 304 SS instead?

Thats probably a good idea, these are 6061 and seem to have held up pretty well. I'll probably have to make new ones when this years front end re-built rears its ugly head

 

[renegadeagle]

Did u ever find a solution ive run into the same problem

Has anybody else found a solution to this?

Hi
Yes ended up with one from a local machine shop

 

[t_j]

Give us a call at the shop for the FOX Parts.. We will not have the Icon parts in Stock.

---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------




Hey Hey,

Do you have any 17-4 ph 900, 303 or 304 SS instead?

Forgot to mention the original icon ones where either mild steel or more likely some 400 series stainless as they corroded pretty terribly.

 

[RPG]

Forgot to mention the original icon ones where either mild steel or more likely some 400 series stainless as they corroded pretty terribly.

Mild Steel with Zinc Coating

 

[t_j]

Mild Steel with Zinc Coating

That would explain why the bolts where seized tighter than a gnats ass and had to driven out with a drift wedge and punch.