Lee Power Steering help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Canuck714

FRF Addict
Joined
Jun 11, 2012
Posts
1,211
Reaction score
1,032
Location
San Antonio TX
Have you tried playing around with other fluids?
Might be worth try to use a different PS Fluid, all it costs is time and fluid.
Id start by adding some Lucas PS conditioner to the fluid you have. If that doesn't take out the noise, drain and fill with something else. Like RedLine or Amsoil.
Not sure why they say dont use Mercon.. But try it too...lol
 
OP
OP
Boss 2731

Boss 2731

Full Access Member
Joined
Feb 20, 2015
Posts
38
Reaction score
18
Location
Alamogordo, NM
Have you tried playing around with other fluids?
Might be worth try to use a different PS Fluid, all it costs is time and fluid.
Id start by adding some Lucas PS conditioner to the fluid you have. If that doesn't take out the noise, drain and fill with something else. Like RedLine or Amsoil.
Not sure why they say dont use Mercon.. But try it too...lol
When I first installed the system, the directions recommended Lee power steering fluid but did not specify that synthetic fluid and or atf as used in the stock system were specifically not to be used. Well, I used a AMSOIL synthetic atf. After I completed the original install and started having problems, this came up in my communication with Lee. I was kinda scolded for the fluid I used but they did replace the pump free of charge. I believe it’s since been added to the install directions.
 
Top