GEN 2 KO2 Tyre pressures on snow on dirt

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

amREADY

Full Access Member
Joined
Aug 24, 2019
Posts
357
Reaction score
318
Location
Victoria, BC
This is what they run at RA. Drive paved road to and from. They also run RA in the snow

I find the 4 psi difference is too big in a SCREW and I also have a tonneau, rack, and recovery gear at a minimum (so 250 lbs). In that case, I generally run my rears down 1 psi or 2 and it feels perfect.

When I am running a tent and camping gear as well, I run even pressures.
 

saym14

Full Access Member
Joined
Mar 29, 2018
Posts
553
Reaction score
204
Location
Prescott AZ
I find the 4 psi difference is too big in a SCREW and I also have a tonneau, rack, and recovery gear at a minimum (so 250 lbs). In that case, I generally run my rears down 1 psi or 2 and it feels perfect.

When I am running a tent and camping gear as well, I run even pressures.
yup - more load and the rear and you need a few more PSI
 

EastEndAngler

Full Access Member
Joined
Jun 1, 2020
Posts
158
Reaction score
130
Location
Long Island, NY
I find the 4 psi difference is too big in a SCREW and I also have a tonneau, rack, and recovery gear at a minimum (so 250 lbs). In that case, I generally run my rears down 1 psi or 2 and it feels perfect.

When I am running a tent and camping gear as well, I run even pressures.

I'll second this as someone with a static 250lbs in the bed. From April to November the truck is on the beach almost everyday, mostly soft stuff. I don't feel like having to air up and have found that 30(f) 28(r) serves me well. If the truck is going back out on the high way I go back to 35F / 32R cold. A few PSI on the SCREW does make a difference.
 

docskeet1

Full Access Member
Joined
Sep 11, 2018
Posts
376
Reaction score
246
Location
Athens GA
This is what they run at RA. Drive paved road to and from. They also run RA in the snow

This is what I started running after Raptor Assault as well. I also used Forscan to reset the TPMS to stop the low pressure warnings (after learning hexadecimal notation). Better traction/larger contact patch, and better ride (purely subjective).
 

saym14

Full Access Member
Joined
Mar 29, 2018
Posts
553
Reaction score
204
Location
Prescott AZ
This is what I started running after Raptor Assault as well. I also used Forscan to reset the TPMS to stop the low pressure warnings (after learning hexadecimal notation). Better traction/larger contact patch, and better ride (purely subjective).
at what PSI does the warning light come on at ? I ran 33/30 offroad and didnt get any warnings ?
 

docskeet1

Full Access Member
Joined
Sep 11, 2018
Posts
376
Reaction score
246
Location
Athens GA
I think about 8 psi low triggers the warning light. Nominal is 38 psi. Running the rears at 28 psi set it off.
 

EastEndAngler

Full Access Member
Joined
Jun 1, 2020
Posts
158
Reaction score
130
Location
Long Island, NY
This is what I started running after Raptor Assault as well. I also used Forscan to reset the TPMS to stop the low pressure warnings (after learning hexadecimal notation). Better traction/larger contact patch, and better ride (purely subjective).

Do you know where this is located in ForScan? I'd love to set my triggers to 28 or 30psi
 
Top