ICON Vehicle Dynamics - Ford Raptor RXT Rear Suspension System

[MOLONxLABE]

@ICONRep

I'm running a Deaver +2 leaf pack with your bump stop kit. Can I remove the bump stop spacer for the up travel gains or is that a bad idea?

---------- Post added at 03:22 PM ---------- Previous post was at 03:15 PM ----------

I should I also add that I'm installing a traditional bed cage suspension setup soon so the shock won't be a limiting factor.

My question is will my leaf pack strike the bump stop frame at full bump?

 

[ICONRep]

@ICONRep

I'm running a Deaver +2 leaf pack with your bump stop kit. Can I remove the bump stop spacer for the up travel gains or is that a bad idea?

IF you install the new RXT 3.0 you can other wise NO.

 

[MOLONxLABE]

IF you install the new RXT 3.0 you can other wise NO.

Sorry, I had to clarify my original post.

 

[ICONRep]

@ICONRep

I'm running a Deaver +2 leaf pack with your bump stop kit. Can I remove the bump stop spacer for the up travel gains or is that a bad idea?

---------- Post added at 03:22 PM ---------- Previous post was at 03:15 PM ----------

I should I also add that I'm installing a traditional bed cage suspension setup soon so the shock won't be a limiting factor.

My question is will my leaf pack strike the bump stop frame at full bump?

As long as the specific Deaver pack you are running is not to think then there should not be an issue. The Deaver +2 should be fine with out coming in contact, but we have not tested in house at this point. With that said......You need to have whomever performing the work cycle the suspension, and come up with those answers 100% on your truck with all parts being used factored in.

 

[MOLONxLABE]

As long as the specific Deaver pack you are running is not to think then there should not be an issue. The Deaver +2 should be fine with out coming in contact, but we have not tested in house at this point. With that said......You need to have whomever performing the work cycle the suspension, and come up with those answers 100% on your truck with all parts being used factored in.

Okay, that's what I thought. Thanks for the insight, I'll stop hijacking your thread now lol.

 

[Hockster]

Is there a need to change the location of the brake lines and abs wires to allow this extra movement?

 

[RLTW]

You'll have some deployment money to burn through when you get back.


Donate to Avery and be entered into a raffle for an awesome prize for your Raptor.

The Double AA Gift Card
November Pay It Forward Event! - Page 81 - FORD RAPTOR FORUM - Ford SVT Raptor Forums - Ford Raptor

This is definitely on my list for dep money.

 

[ICONRep]

Is there a need to change the location of the brake lines and abs wires to allow this extra movement?

No sir....everything is good as is.

 

[Dv8tor]

Is a sprung under kit in the works in the future?

 

[Nick@Apollo-Optics]

How much disassembly/assembly is required to adjust the leaf springs? I tow with my truck from time to time and want to be able to tow when I need to, but not have the extra lift for daily driving and parking garages.