Icon Attitude Adjustment Collar w/ 1" Front Level?

[titanjc]

I measured my 2017 on level ground and found that my stock rake front to rear is only 1 3/8", which seems to be a little less than a typical 2017-2018 truck. I'm at 39 7/8" Front and 41 1/4" Rear. I actually prefer to have a slight bit of rake rather than be perfectly level or nose-high, so I am looking at the Icon Attitude Adjustment Collars since they offer a 1" front level, which would leave me with about 3/8" rake front to rear.

Anyone have photos of a 1" front level with similar measurements? Wouldn't mind seeing some pictures before I pull the trigger.

 

[RR_Raptor]

Bump for a photo request. I just squeezed the trigger on the Icon Attitude Adjustment and am also thinking of only going 1". My measurements are damn near the same and think 1.5" would be a bit too much. I'm installing ALPHAequipt Delta +25mm 17" wheels with the same 315 BFG's.

I hope someone can post a photo of either the 1" or 1.5" Icon before level mine, early next week. But if not, I'll post before/after photos and what I decided to run.

 

[titanjc]

I’ve had the Icon AACs in my garage for a couple weeks now and I may tackle the install this weekend. If I do I’ll post some before/after pics.

 

[RR_Raptor]

@titanjc did you install the ICON kit over the weekend?

 

[titanjc]

@titanjc did you install the ICON kit over the weekend?

No, I didn't get around to it yet. You?

 

[RR_Raptor]

Thursday. Measured again and now leaning towards 1.5”. That would still leave a ~1/4” rake.

 

[RR_Raptor]

Here it is. 1.5” ICON AAC, ALPHAequipt Delta +25mm 17x8.5” wheels wrapped in BFG KO2 315’s.

I LOVE the wheels. The ride is actually better. However, the front is a bit too high for my liking. The rake was 2” prior to leveling, I added the 1.5” Icon kit and now the front is actually 1/8” higher than the rear. It’s not a big deal but I’m such a perfectionist and wish the front was just a bit lower.

All in all, I think it’s a great look and am pumped.

 

[TXRaptor]

Here it is. 1.5” ICON AAC, ALPHAequipt Delta +25mm 17x8.5” wheels wrapped in BFG KO2 315’s.

I LOVE the wheels. The ride is actually better. However, the front is a bit too high for my liking. The rake was 2” prior to leveling, I added the 1.5” Icon kit and now the front is actually 1/8” higher than the rear. It’s not a big deal but I’m such a perfectionist and wish the front was just a bit lower.

All in all, I think it’s a great look and am pumped.

View attachment 146468

View attachment 146469

View attachment 146470

Looks good! I see Deaver +3s in your future...

 

[titanjc]

Here it is. 1.5” ICON AAC, ALPHAequipt Delta +25mm 17x8.5” wheels wrapped in BFG KO2 315’s.

I LOVE the wheels. The ride is actually better. However, the front is a bit too high for my liking. The rake was 2” prior to leveling, I added the 1.5” Icon kit and now the front is actually 1/8” higher than the rear. It’s not a big deal but I’m such a perfectionist and wish the front was just a bit lower.

All in all, I think it’s a great look and am pumped.

View attachment 146468

View attachment 146469

View attachment 146470

Your truck looks great, I like the wheels. An eighth of an inch is nothing, it looks dead level to me!