How many have gone the SDI Top Hat route to level?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AARaptor

Member
Joined
Jul 9, 2023
Posts
15
Reaction score
3
Location
Katy, TX
My measurements right now are 40.5” front, and 41.5” rear. I have the SDI top hats ready to go, but am thinking to either go with the Eibach 1.5” rears, the RPG 1” spacers, or the RPG 2” spacers. Need to decide soon, as I want to get these top hats installed
 

MultiStateRaptor Guy

Full Access Member
Joined
Jul 16, 2023
Posts
128
Reaction score
58
Location
Midwest
RPG 1.5" perch collars worked just fine for our '23 Raptor V6 EcoBoost with a factory Performance Package. We decided to re-align it in case something was a little off in it's front end alignment. It turned out nothing was off in the front end. Easy / peasy.
 

CecilK12

Full Access Member
Joined
Feb 21, 2024
Posts
236
Reaction score
174
Location
Monrovia Indiana
SDI top hat & eibach 1.5 rear installed 10 days ago. first i tought it was 5~10% firmer, but more i ride it, feels almst like stock. I have 23 37PP. after install my front raise to 43.5" & rear to 44" (before the sdi & eibach picture installed with height, i have no idea why it's 2" taller now, i will messure it again after something settles, in about one more week). Do i need UCA? Can i keep stock? I have SPC cambolts and wanted to know if i need the UCA before i do the alignment?
Damn that looks good
 

roger7254

Active Member
Joined
Feb 22, 2023
Posts
94
Reaction score
127
Location
Orange County, CA
SDI top hat & eibach 1.5 rear installed 10 days ago. first i tought it was 5~10% firmer, but more i ride it, feels almst like stock. I have 23 37PP. after install my front raise to 43.5" & rear to 44" (before the sdi & eibach picture installed with height, i have no idea why it's 2" taller now, i will messure it again after something settles, in about one more week). Do i need UCA? Can i keep stock? I have SPC cambolts and wanted to know if i need the UCA before i do the alignment?
changed UCA picture!
 

Attachments

  • 20240607_151007.jpg
    20240607_151007.jpg
    207 KB · Views: 7

MultiStateRaptor Guy

Full Access Member
Joined
Jul 16, 2023
Posts
128
Reaction score
58
Location
Midwest
My sits even @ 44"s all the way around with the RPG collars, plus I took it to an authorized Ford dealer for a re-alignment after the collars were installed. It took them less than (1) one hour to align it, barely off @ all, so I was told by their service advisor @ Laird Noller Ford in Lawrence or Topeka KS.

My '23 Raptor Eco Boost has a "37" Performance Package, just in case that info is needed for Y'all.
 
Top