Hock's 2012 Raptor Build

[KaiserM715]

Damn i was hoping that harness could be moved with out a lift because that is on the todo list. Interesting about the body mounts, mine must be sloshing with water given the water crossings i have done.

I was planning this also... Might hold off until WSI gets a lift..

-Greg

You can do it without a lift, but the routing will be different than Hocks. His routing is more protected than what J and I did.
http://www.fordraptorforum.com/f5/wiring-harness-re-route-9648/

 

[Hockster]

You can do it without a lift, but the routing will be different than Hocks. His routing is more protected than what J and I did.
http://www.fordraptorforum.com/f5/wiring-harness-re-route-9648/

Ah stupid me, I thought you ran yours on the other side of the mount. the way I did it the room is minimal for sure!!! and no way would you want to do what I did without a hoist... ha ha

 

[Hockster]

Mail man came today... Now should I install these for the Snoball500??? Since most likely we aint jumping

 

[Squatting Dog]

You should that way you can have dylan set up you shocks at snoball 500

-Greg

 

[Hockster]

Winch done wires ran and tied off plugs mounted..

 

[Hockster]

Rear Shocks installed... So easy figured id do it today..

 

[Hockster]

Hood lights installed man its nice to have the plastic cutter for my die grinder... and since I didnt want to cut my arms up connecting the upfitter wires I removed two hold trees and one of the screws that hold the 4x4 module in place so the harness will come down under the dash and I can get to everything...
Also, instead of cutting off the long bolt that mounts the light I made a spacer and it raises the light up a bit too






















Oh ya, and ARE contacted me and is going to use my truck for the Eastern Sports & Outdoor Show. If any of you guys are going o the show my truck will be there with a color matching cap, a bedrug and a Whisper HD roof rack
THis silver truck aint mine just the cap and roof rack are the ones they are installing painted red

 

[BlueSVT]

Woo-Hoo! Nice looking truk... Glad you decided to not be lazy, and slapped the Icons on there... haha

 

[Icecobra]

I gotta ask are you going to put anything to mount the winch on the front? If so where are you going to run the connector/plug in at? I am looking for ideas I have the wires in place just dont know where to mount the plug. I was looking for easy to get to and not having to open the hood to get to it, I use the plug with jumper cables also so its nice to just plug in and not open the hood.. I mounted my 140 amp circuit breaker just need ideas on where to mount the actual plug....

 

[Hockster]

I gotta ask are you going to put anything to mount the winch on the front? If so where are you going to run the connector/plug in at? I am looking for ideas I have the wires in place just dont know where to mount the plug. I was looking for easy to get to and not having to open the hood to get to it, I use the plug with jumper cables also so its nice to just plug in and not open the hood.. I mounted my 140 amp circuit breaker just need ideas on where to mount the actual plug....

I am planning on making a hook up for it at the front. It wont be for this snoball run though... I will be making a new front bumper this year so I will have a different setup than the stock bumper... Ill look tomorrow and take some pics and throw out some ideas...
I was thinking about making a setup for the stock bumper and I was planning on making that lower grill fold down on a spring to expose the receiver and the plug