Has anyone tried any oil additives in the 3.5 l EcoBoost and heard or made any actual difference in the performance and longevity of the engine

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

New recaros

FRF Addict
Joined
May 23, 2019
Posts
2,879
Reaction score
4,539
Location
Colorado
Pricey for sure. Remember the Raptor is just DI, it also has port injection. I'm sure it's good oil though.
Valvoline VR1 Racing Motor Oil is recommended for high-performance gasoline engines as well as those burning full or partial alcohol fuels. It is NOT recommended for vehicles with catalytic converters or in wet clutches.
Seems it not made for converters
 

Keith88

FRF Addict
Joined
Jul 28, 2022
Posts
2,030
Reaction score
5,746
Location
Boise, ID

Attachments

  • E2490277-0B45-4AA6-9EA1-882578BE9991.jpeg
    E2490277-0B45-4AA6-9EA1-882578BE9991.jpeg
    76 KB · Views: 17
  • 0C454570-01F2-49FE-81A7-DAAD2B42F171.jpeg
    0C454570-01F2-49FE-81A7-DAAD2B42F171.jpeg
    83.9 KB · Views: 17
  • 0038D2DB-D6BC-47DE-A8F5-5FE02E9E6D91.jpeg
    0038D2DB-D6BC-47DE-A8F5-5FE02E9E6D91.jpeg
    42.1 KB · Views: 15
  • 9184DA20-CA2A-41C9-9A40-4E36C1559ACA.jpeg
    9184DA20-CA2A-41C9-9A40-4E36C1559ACA.jpeg
    54.5 KB · Views: 17

BigTaco

Full Access Member
Joined
Jul 3, 2022
Posts
110
Reaction score
137
Location
Grants Pass Oregon
Also,
For additives to be truly effective, they need to be of good quality ( there are 40 different types of ZDDP for example) and blended with the base oil at specific temperatures. Also, look for a high VI (Viscosity Index) and try and determine/find out if the base oil is of the highest quality. Sometimes oils are blended with a lot of viscosity improvers to get a good VI score, but viscosity improvers actually wear out of many heat cycles. A good base oil will have good VI from the start and maintain its VI through out of it's lifecycle.
 

BigTaco

Full Access Member
Joined
Jul 3, 2022
Posts
110
Reaction score
137
Location
Grants Pass Oregon
Pricey for sure. Remember the Raptor is just DI, it also has port injection. I'm sure it's good oil though.
Great point! Keep in mind though that the port/direct injection motors still accumulate more of the soot deposits (compared to a port only motor). The calcium (detergent) balance in a DI oil help tremendously. The same things that control soot in a DI motor also help with Low Speed preignition (LSP). SN+ oil specification is all about this.
 

ColoradoBoss

Full Access Member
Joined
Jul 11, 2017
Posts
469
Reaction score
270
I like Schaeffers. I went to an oil demo once. Kinda hard to explain but they have a machine that measures resistance via voltage. The have a bar that you press down on a spinning bearing that sits in a bowl of oil. Schaeffers is the only oil where they could not apply enough pressure to stop the bearing from spinning. Even after removing the bowl, so the bearing just had residue on it, they couldn't stop the bearing from spinning. After watching that demo, I use Schaeffers in everything.
 

goblues38

FRF Addict
Joined
Oct 27, 2018
Posts
2,697
Reaction score
3,982
Location
STL
I like Schaeffers. I went to an oil demo once. Kinda hard to explain but they have a machine that measures resistance via voltage. The have a bar that you press down on a spinning bearing that sits in a bowl of oil. Schaeffers is the only oil where they could not apply enough pressure to stop the bearing from spinning. Even after removing the bowl, so the bearing just had residue on it, they couldn't stop the bearing from spinning. After watching that demo, I use Schaeffers in everything.

marketing 101....the demo you went to is just an expensive version of a war mart end cap. Not judging, but they are designed to make you buy.

Hart%20Tool%20End%20Cap%20Image%20carousel.jpg
 
Top