GJ Motorsports 3rd Brakelight

[Chiefapple]

Well at least we all know how to fix this now IF you experience that issue. I never knew about it myself and it seems like there might only be a FEW kits out there this happened to

Well I’m never behind my truck, so it took me a year to figure this out. Lol



Sent from my iPhone using Tapatalk

 

[renegadeagle]

I am sorry about getting the wrong bracket sent out. One of my employee's, who's honestly not as familiar with these kits as I, picked the wrong box and didn't think to read the pick ticket properly. So he sent out the Gen2 kit instead of the Gen1 kit. We did get you a pre-paid return label for the wrong kit and once we got it back I personally made sure to send out the right one. So from the time you got the original order it was just under 2 weeks for you to get the right one.

As a sign of good faith I've gone ahead and refunded your order an additional 5% of the original total. Hopefully that little extra money back in your pocket helps make up for the mix-up. My pick/pack guy also apologizes for messing up the shipment.

Apologies accepted!!
Thank you so much for that gesture also! . It means a lot and that customer service is Always first,specially for us as a Great community here in the Forum.
My Respects

 

[renegadeagle]

Sorry there where a small batch of modules with this reversed. Swapping the blue and red wires on the factory integration harness at the 2 pin white plug will resolve your issue.

TJ, Thank you so much for reaching out on saturday and helping me out
I must say I am Super excited with this product since it began to be an idea.
Want to show it off

I swapped the cable and corrected the issue. Again THANK YOU FOR THAT!!

 

[renegadeagle]

Posting it here in Gen 1--Since that is what I have.. Had posted this on the Gen 2 Section since was answering to another fellow member

I got a really rough deal on this
I also love it and it is beautiful..Totally agree here
But I did receive 1)Wrong assembly at first--2) Reversed polarity harness had the incorrect wiring 3)And now one of the leds is out of commission (does not turn on)and if it does goes on/off.
I did post in the Gen1 ( https://www.fordraptorforum.com/threads/gj-motorsports-3rd-brakelight.61019/page-17) that I did accept apologies for all the trouble and also thanking for the help provided but now been writing emails directly for support to GJ more than 1 week have no answer regarding resolution for that bad assembly / harness.
Let me be clear here I have never disrespected anyone in my 9 years in the Forum.
I am just asking to get another Kit and then I will send back the bad one.I will not leave a hole on my daily driver (obviously the OEM is long gone in the trash).

Respects

 

[4x4TruckLEDs.com]

I thought Tom wrote in the other thread that he's sending you the replacement red LED light???

 

[renegadeagle]

I thought Tom wrote in the other thread that he's sending you the replacement red LED light???

He is and I am grateful.Thank you

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Chiefapple]

Okay give this a try. Swap the blue and red wires on the factory harness. Some modules had the polarity reversed (as you suspected). That should get you back up and running.

Do you have a picture of the wires that need to be swapped?


Sent from my iPhone using Tapatalk

 

[renegadeagle]

Do you have a picture of the wires that need to be swapped?


Sent from my iPhone using Tapatalk

On the white connector where the blue and red cables go

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Chiefapple]

On the white connector where the blue and red cables go

Sent from my SAMSUNG-SM-G920A using Tapatalk

Figures mine are all green.


Sent from my iPhone using Tapatalk

 

[renegadeagle]

Figures mine are all green.


Sent from my iPhone using Tapatalk

Green???

Sent from my SAMSUNG-SM-G920A using Tapatalk