Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
How many codes did you change?I tried the Global Windows and it does not seem to be working. Is it working for other folks? I remember a while back someone saying that this did not work on the Raptors.
Works ok my 21 with the changes posted above.I tried the Global Windows and it does not seem to be working. Is it working for other folks? I remember a while back someone saying that this did not work on the Raptors.
Just the windows down. Do I need to add all three? Just never needed windows up since i only use window down when im walking to my trucks.How many codes did you change?
Worked just fine for me. Make sure you make all the changes, also make sure if you add the menu to Sync 4 that you enable it in the menu. It's disabled by default.I tried the Global Windows and it does not seem to be working. Is it working for other folks? I remember a while back someone saying that this did not work on the Raptors.
Just to confirm, you’re changing all 7 codes in the above post? With the Sync 4 menu code being optional? Is all of this correct?Worked just fine for me. Make sure you make all the changes, also make sure if you add the menu to Sync 4 that you enable it in the menu. It's disabled by default.
All 7 codes, plus the optional one. For a total of 8 changes. Then, you should see the option in the settings menu which you'll need to enable.Just to confirm, you’re changing all 7 codes in the above post? With the Sync 4 menu code being optional? Is all of this correct?
I haven't seen anything that would change the idle speed in forscan, but you can kick on the pro power generator if you have it and get a few extra RPMs that way.Asked this before but didn’t get a reply. Does anyone know if you can increase the idle in Baja mode so it idles loud? If you barely press the accelerator you can hear the valve open up. Would be cool to have that idle.
Either idle needs to be increased or valve needs to be open at idle I think.