Front License plate off to the side.

[Troutrad]

Saw a way to place the front license plate off to the side, out of the way of lower intake vent (where I want to put a behind the grill light). State requires a front lp. Can’t seem to find the bracket to do this.

 

[alphatwox]

https://swarfworks.com/shop?olsPage=products/2017-ford-raptor-front-license-plate-relocation&page=2

 

[CHMP]

https://swarfworks.com/shop?olsPage=products/2017-ford-raptor-front-license-plate-relocation&page=2

I have one and it's great. Except when the car wash robot at the Chevron station tried to take it. #skynet

 

[alphatwox]

I have one and it's great. Except when the car wash robot at the Chevron station tried to take it. #skynet

View attachment 139212

The Robots are Rising....

 

[Goldenknight]

The Robots are Rising....

No it was rinsing

 

[Ali 556]

No need for a bracket, if the truck is new it should have come with 2x 7mm self tapping screw to run them threw the plate into the existing holes.

If not, go to the local hard ware shop, get a 7mm screws and drill and install it.

 

[melvimbe]

No need for a bracket, if the truck is new it should have come with 2x 7mm self tapping screw to run them threw the plate into the existing holes.

If not, go to the local hard ware shop, get a 7mm screws and drill and install it.

What existing holes are you referring to? OP wanted to relocate the LP to the side.

 

[Ali 556]

On my '"19 raptor it came pre- drilled for side and middle of the bumber holes.

 

[Denvertaco07]

On my '"19 raptor it came pre- drilled for side and middle of the bumber holes.

hmmm, i'll have to check that out, but...can you post a pic?

 

[Denvertaco07]

$45

https://store.ijdmtoy.com/collectio...-raptor-tow-hook-license-plate-bracket-aa3514