Nex
RIP CoronaRaptor
Above the infotainment screen
Usually on the left, my truck doesn’t have it but that’s where it will be
I ment in forescan....
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Above the infotainment screen
Usually on the left, my truck doesn’t have it but that’s where it will be
To date…the the values listed in the spreadsheet will not work on a MY24. I purchased and installed the harness from 4Dtech to disable this feature. Works great. Highly recommend!
you da man. Thanks so much, this worked for me.Hey @hamster
There has been some BCM changes so it took a little while to get this one figure out but this is what i had to enable. See below.
View attachment 454210
View attachment 454214
I’m here for this too.Thought I’d just bump this thread. Does the DRL brightness increase work on the 24’s or no?
Hey @hamster
There has been some BCM changes so it took a little while to get this one figure out but this is what i had to enable. See below.
View attachment 454210
View attachment 454214
I searched and seardhed and played with a few things I found....I could not find a way to allow the fog switch to be able to toggle the fogs on and off in auto mode except at night once headlights on. May be a way, but I gave up. Hence why I moved the fogs up to Aux switch. Glad I did and I then connected Fogs with backlight on an S8 to use one switch.I was able to get marker/grille lights to come on with DRL in auto mode yesterday using Forscan on my 24. However, the bottom two codes made the fog lights turn on constantly and the switch would not allow for toggling on/off. Is there a way to make the fogs selectable in auto lights mode or is that not possible? At night, the fogs can be turned on/off at will, of course. Just not during the day in auto mode
Note: I might have answered my own question. If there's no way to toggle the fog lights in auto-mode, I might just order the necessary connector(s) from Specialty Performance Parts like Hamster did.
Moving Fog Lights off Fog Switch and Related Forscan Changes
On the 2024, you have one of the OEM bumper lights wired to the fog switch and the other wired to Aux 1. You can use wiring harnesses from John @Specialtyperformanceparts to easily combine both bumper lights to the fog switch and reuse Aux 1 up top. I wanted to run just the outside fog light...www.fordraptorforum.com