Hello there, I own a Ford Raptor 2017 ecoboost and I recently got the wrench light and the car randomly stopped, then I got these errors using an OBD device and I just wanted to know what they are and possible solutions. (Note I saw a lot of errors about temperature and can it be because I live in a hot and humid area?)
PO106
Manifold Absolute Pressure/
Barometric Pressure Sensor Circuit
Range/Performance
U210F
Throttle/PedaI Position Sensor/
Switch A Communication Circuit Low
P2ABE
Turbocharger/Supercharger
Wastegate Actuator B Driver Current/
Temperature Too High
P06A8
Sensor Reference Voltage "C" Circuit
Range/Performance
P2ABD
Turbocharger/Supercharger
Wastegate Actuator A Driver Current/ I
Temperature Too High
PO106
Manifold Absolute Pressure/
Barometric Pressure Sensor Circuit
Range/Performance
U210F
Throttle/PedaI Position Sensor/
Switch A Communication Circuit Low
P2ABE
Turbocharger/Supercharger
Wastegate Actuator B Driver Current/
Temperature Too High
P06A8
Sensor Reference Voltage "C" Circuit
Range/Performance
P2ABD
Turbocharger/Supercharger
Wastegate Actuator A Driver Current/ I
Temperature Too High