Ford Performance Rear Diff cover

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Todd Turbo S

FRF Addict
Joined
Nov 28, 2012
Posts
1,020
Reaction score
1,521
Location
Nor Cal
Installed a Ford Performance Rear Diff cover. As others have said, great quality, more stout and more lube capacity. I did this at 390 miles and had no problem removing the OEM cover. The surface rust came off easily with green Scotch-Brite pad. I flushed the remaining oil with an extra quart if AMSOIL, just very **** retentive.

Took me 2 1/2 hours. Took advantage of the spear wheel being removed and cleaned it/coated with Nyalic.

The instructions call to torque the bolts to 25 lbs, but everything I read and videos said 14lbs, so I opted with 14lbs.

3B446B78-7394-49B3-A8F2-9E9FC0928606.jpeg

D0CBE5FC-BB43-46D5-983D-A0B726D73DDE.jpeg

17E84A49-2E94-4783-97F3-1D86DB509C7B.jpeg

89F7C3E7-DA0C-4FEA-9D6B-8E880E323C8D.jpeg
 
OP
OP
Todd Turbo S

Todd Turbo S

FRF Addict
Joined
Nov 28, 2012
Posts
1,020
Reaction score
1,521
Location
Nor Cal
Nice job. I plan on doing this one day.

Cute blanket, Btw.
Thanks, it’s very simple, just watch the videos. I’m a novice and my only problem, was, I didn’t check my torque wrench before I started and had to scramble to borrow my buddies as mine didn’t go to 11 and 14. Yeah, that is my sons first big boy bed set (6 years old, he’s now 28), comes in handy...
 

KCRaptor643

Active Member
Joined
Jan 12, 2019
Posts
76
Reaction score
58
Location
Tacoma, WA
Thinking about replacing it when weather gets better, is it straight forward, no issue/challenge, replacement???
 

Mark McAwesome

Active Member
Joined
Jan 11, 2020
Posts
68
Reaction score
65
Location
Iowa
Off topic but where did you get the exhaust wraps from? On topic, did you use the stock bolts that came with or get different bolts?
 

ezndo

Full Access Member
Joined
Jun 9, 2012
Posts
109
Reaction score
57
Location
FL
One more off topic question....that looks like a Stainless Works exhaust, does it rub/touch your spare tire at all? Mine does...
 
Top