Ford "Cargo Management System" installed

[pander952]

Could you use two dividers at the same time?

 

[alockbox]

60” exactly

Thank you!

Unfortunately, for anyone else with a RetraxPro or RetraxPro XR, the canister is 61.5” across and barely clears the two boxlink grab bars. So unless lower profile aluminum support brackets become available, this bar won’t fit. But I doubt anything could be made much slimmer since ford would have done so themselves. 3/4” on each side is all that’s needed. The only remaining option would be to cut the rails shorter but as the canister is infront of the forward boxlink slots, a different type of support would need to be fashioned.

 

[GOTSVT?]

The rails are aluminum, and could easily be cut shorter.

 

[alockbox]

The rails are aluminum, and could easily be cut shorter.

Right. But they would then have no way to mount, since they mount into the boxlink. And we know they won’t reach since the canister blocks the box link.

That’s why I mentioned it could be cut but you’d need to rig a “lower profile” way to extend the support to the boxlink.

 

[alockbox]

I’m tempted to try this with some kind of a T-slot rod or extension.