First Gen 1 Issue I’ve had..

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,612
Reaction score
23,656
Location
here, on frf
think its about time you take a drive. i drove 16hours to a dealer another raptor member recommended. still didnt fix my problem, but they did rebuild my trans under warranty where other dealers wouldnt. i known palm desert is kinda far from everywhere, but i think a trip west or east into az might be in your future.
 

Ruger

FRF Addict
Joined
May 16, 2011
Posts
9,555
Reaction score
8,510
Location
Northern Nevada
Another thing to check since you are at it, is the Mass Airflow Sensor. If you are running an oiled K&N, they will foul the element on the MAS causing idle and other issues.

I have experienced this on a different truck. I've never run an oiled air filter on any vehicle since that occurred.
 

MTF

FRF Addict
Joined
Nov 27, 2010
Posts
5,437
Reaction score
2,372
Location
Celebration, Florida
I've been running an oiled air filter for 8 years now on this SC Raptor and over 20 years between three Tahoes.

Never had an issue!!!!!

When done right, (meaning you follow the directions to the letter), there will be no issue!!!!!
 

Canuck714

FRF Addict
Joined
Jun 11, 2012
Posts
1,192
Reaction score
992
Location
San Antonio TX
I've been running an oiled air filter for 8 years now on this SC Raptor and over 20 years between three Tahoes.

Never had an issue!!!!!

When done right, (meaning you follow the directions to the letter), there will be no issue!!!!!

Congrats....

For the OP... I suggest you clean or replace the MAF sensor as they will create running/idle issues if they are dirty or oil fouled. I dont know the condition of yours, so its just a cheap/easy place to look for a solution.
 

MTF

FRF Addict
Joined
Nov 27, 2010
Posts
5,437
Reaction score
2,372
Location
Celebration, Florida
Congrats....

For the OP... I suggest you clean or replace the MAF sensor as they will create running/idle issues if they are dirty or oil fouled. I dont know the condition of yours, so its just a cheap/easy place to look for a solution.

It wasn't the K&N filter, he has a PCM software issue.
 
OP
OP
Marspool

Marspool

FRF Addict
Joined
Sep 4, 2017
Posts
1,224
Reaction score
267
Location
Socal
Transmission Lead Frame-replaced
Trans valve body and solenoids-replaced
Trans seals-replaced
Optima red top battery-replaced
MAF sensor-replaced
Throttle body-replaced
K&N filter cleaned-

No check engine or wrench right now.
My obd2 scanner says no codes currently present in Drivetrain or Emissions.

Called dealership 2 days ago to ask about pcm programming or flashing and have not heard back. Like it was suggested, looking at taking it out of area to another more capable dealership than mine.

Anybody been to Galpin Ford in Burbank?
I’m in Palm Desert, about 2 hours away...
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,612
Reaction score
23,656
Location
here, on frf
Transmission Lead Frame-replaced
Trans valve body and solenoids-replaced
Trans seals-replaced
Optima red top battery-replaced
MAF sensor-replaced
Throttle body-replaced
K&N filter cleaned-

No check engine or wrench right now.
My obd2 scanner says no codes currently present in Drivetrain or Emissions.

Called dealership 2 days ago to ask about pcm programming or flashing and have not heard back. Like it was suggested, looking at taking it out of area to another more capable dealership than mine.

Anybody been to Galpin Ford in Burbank?
I’m in Palm Desert, about 2 hours away...
i have heard good things about galpin. i dont have experience with them, however i know they are raptor friendly
 
Top