MTF
FRF Addict
Let's just hope you didn't damage the PCM trying to fix your truck.
Good Luck, I'll keep my fingers crossed for you.
Good Luck, I'll keep my fingers crossed for you.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Another thing to check since you are at it, is the Mass Airflow Sensor. If you are running an oiled K&N, they will foul the element on the MAS causing idle and other issues.
I've been running an oiled air filter for 8 years now on this SC Raptor and over 20 years between three Tahoes.
Never had an issue!!!!!
When done right, (meaning you follow the directions to the letter), there will be no issue!!!!!
Congrats....
For the OP... I suggest you clean or replace the MAF sensor as they will create running/idle issues if they are dirty or oil fouled. I dont know the condition of yours, so its just a cheap/easy place to look for a solution.
i have heard good things about galpin. i dont have experience with them, however i know they are raptor friendlyTransmission Lead Frame-replaced
Trans valve body and solenoids-replaced
Trans seals-replaced
Optima red top battery-replaced
MAF sensor-replaced
Throttle body-replaced
K&N filter cleaned-
No check engine or wrench right now.
My obd2 scanner says no codes currently present in Drivetrain or Emissions.
Called dealership 2 days ago to ask about pcm programming or flashing and have not heard back. Like it was suggested, looking at taking it out of area to another more capable dealership than mine.
Anybody been to Galpin Ford in Burbank?
I’m in Palm Desert, about 2 hours away...
That’s what I’m looking for, a “Raptor Friendly” dealership within a couple hours drive.i have heard good things about galpin. i dont have experience with them, however i know they are raptor friendly