Finished up my Rough Country light install...

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

byz250f

Full Access Member
Joined
Mar 2, 2017
Posts
353
Reaction score
154
The high

The high beams definitely reaches out further but not by a large margin. Biggest thing I noticed with this bar is while the high beams stretch a little further, it’s more like isolated or like a spot light beam.

The bar is more of a flood. It really lightens up everything but it does not reach as far as the high beams.

Thanks man. Great reply
 

nick71692

Full Access Member
Joined
Jul 31, 2017
Posts
101
Reaction score
32
I installed the rough country fog light kit about 11 months ago...light output is great, but the housing quality leaves a lot to be desired. The black coating has peeled off almost every one and now I have exposed metal which looks terrible. I dont offroad just day to day driving up here in Ohio.

In addition to light output I would assume a kit like BD would be much more durable for the cost.
 

OffroadAlliance.com

Supporting Vendor
Supporting Vendor
Supporting Member
Joined
Mar 10, 2015
Posts
1,785
Reaction score
947
Location
Boston, MA
@nick71692

Yes, the Baja Designs, Rigid, KC's all definitely have a better coating to the light housings. You might reach out to Rough Country and see if they'll warranty them. Less than a year old and the finish is almost completely gone would qualify for new lights from most companies.
 

ccschauf

Member
Joined
Feb 27, 2019
Posts
1
Reaction score
0
Location
Park City, UT
I am having issues with the wiring aspect of this. Could you show me how you ran the wires and modified the wiring harness given the on/off switch provided (assuming you ran them to the existing switches in the truck?). I’m confused. Thanks much!
 
Joined
Oct 9, 2019
Posts
39
Reaction score
41
Location
WY
@Cliff Lohner I installed one of these 30” bars as well. It was pretty straight forward install. I was concerned about the clearance on the light bar and Louvers since it’s pretty tight in there. Once I got it all installed I stood by the grill and remote started the truck to see if there were any issues. The Louvers work just fine. However, I noticed when going from completely open position to initiate closing, there is a little click noise. I don’t know if that is just the noise of the Louvers starting to move or if it’s actually hitting the light bar. I was curious if you have the same happening?
 
Top