Eibach Pro-lift springs installed with pics and comments

[FrodoTBaggins88]

How did this came out? Just got a 19’ and wondering if its the same as the 17-18 and if it will have any issues with the fox live valve system.

Read through the thread. I have a 19 and I think a couple of others who posted. No issues.

Congrats on your truck!

 

[BIGDJE]

How did this came out? Just got a 19’ and wondering if its the same as the 17-18 and if it will have any issues with the fox live valve system.

no issues i have the on my 19

 

[RomoLS]

Read through the thread. I have a 19 and I think a couple of others who posted. No issues.

Congrats on your truck!

Thanks! Just finished reading through the whole thread, just that im kind of confused cuz on eibach’s page says 1,7” lift and on all other pages says 2.5” lift so not sure if its the same springs or another option with less lift??

 

[FrodoTBaggins88]

Thanks! Just finished reading through the whole thread, just that im kind of confused cuz on eibach’s page says 1,7” lift and on all other pages says 2.5” lift so not sure if its the same springs or another option with less lift??

The 1.7" number may be like after some use and sag. I think for my truck I got around 1.7 to 2.0, somewhere in there. I don't think mine was at 2.5". I didn't measure because I don't really care that much. Some of the other folks' trucks seem to have gotten more lift in the front than mine. There's only one spring option though. I would expect roughly 2.0".

 

[RomoLS]

Same part number, same page, different lift numbers lol

 

[FrodoTBaggins88]

Maybe they mean the springs are 2.5" longer than stock equating to +1.7" of ride height. That would make a lot of sense actually, because I knew immediately when I got my springs installed that it did not add 2.5" of ride height. I estimated 1.75".

 

[vazo]

I just got off the phone with eibach to get some info on springs for my GT500 and thought I would ask them about springs for my Raptor. They confirmed that the spring rate is 540+ lbs. They also said that you can expect to get 2.5" of lift with a stock bumper. A little less if it's an aftermarket heavier bumper.

Sent from my SM-G960W using Tapatalk

 

[Leftsidej]

Just got mine delivered today, I’ll post before and after pics when I finally get them installed.

 

[vazo]

Can you post before and after measurements as well .. just curious what the actual lift is gonna be compared to what eibach says.

Sent from my SM-G960W using Tapatalk

 

[Leftsidej]

Can you post before and after measurements as well .. just curious what the actual lift is gonna be compared to what eibach says.

Sent from my SM-G960W using Tapatalk

Absolutely! Where should I start my measurement from? Not sure what exactly is the norm in measuring for this