Console removal

[Legacy32]

So I have always put sound deadener in my trucks (F250's) and it was fairly easy and only took 4-5 hours to do the entire truck, but I am having a hard time finding any instructions on removing the center console on the raptor/f150 with the gear shifter in the console. Does anyone have a drawing or video they can share? TIA

 

[figure1a]

Side are held in by clips and pop off with hands. Top piece is held on by a bolt underneath the pad/compartment in front of the shifter then that piece pops off (clips again).

 

[rschap1]

I originally came here and asked about getting at an A.C. actuator that needs console out to access it.
"The Car Stereo Company" (his user name here) hooked me up with detailed videos.

 

[Legacy32]

Side are held in by clips and pop off with hands. Top piece is held on by a bolt underneath the pad/compartment in front of the shifter then that piece pops off (clips again).

Yea I had done some digging around the other day and found the bolt you are talking about. Was hoping some one had a drawing or video.

 

[Coastal]

If you YouTube it there's a bunch of videos - comes apart pretty easy!

Here's one:

 

[figure1a]

If you YouTube it there's a bunch of videos - comes apart pretty easy!

Here's one:

This is not for 14th Gen F150 (Gen 3 Raptor).

 

[Legacy32]

If you YouTube it there's a bunch of videos - comes apart pretty easy!

Here's one:

I have researched Youtube and there isn't one for a 14th gen f150, that has the same console as the 3rd gen raptor. The console you posted and the 3rd gen raptor console are completely different. The video you posted is how to remove the trim piece which is not how the trim comes apart in the 3rd gen raptor.

 

[Coastal]

Apologies - forgot to check which Gen I was in.