Clunking sound on Gen 3 too

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Raptorbert

Full Access Member
Joined
Jul 17, 2022
Posts
371
Reaction score
212
Location
Hampshire, IL
It’s interesting how everyone is getting different part numbers. Do the stickers on the backside of the reservoir match what’s written or are they the ml3v18w002/3?
Here’s photos of all mine. They match what’s written on the service paperwork accept for one that doesn’t. The one that doesn’t is ML3V-18W002-FA which just by elimination is ML3Z*18125*BM on paper. Also I got to say, for 2 months old they sure do look rusty already.
 

Attachments

  • IMG_4996.jpeg
    IMG_4996.jpeg
    134.4 KB · Views: 19
  • IMG_4998.jpeg
    IMG_4998.jpeg
    106.6 KB · Views: 18
  • IMG_4999.jpeg
    IMG_4999.jpeg
    83.8 KB · Views: 18
  • IMG_5002.jpeg
    IMG_5002.jpeg
    133.3 KB · Views: 17
  • IMG_4994.jpeg
    IMG_4994.jpeg
    270.9 KB · Views: 18

BSARAP

Member
Joined
Feb 16, 2024
Posts
6
Reaction score
5
Location
Georgia
Here’s photos of all mine. They match what’s written on the service paperwork accept for one that doesn’t. The one that doesn’t is ML3V-18W002-FA which just by elimination is ML3Z*18125*BM on paper. Also I got to say, for 2 months old they sure do look rusty already.
Adding mine in here as well for both the rears I got done today - Only one seems to match what was written on order sheet for me which is the Left Rear shock (ML3Z18125BN) and the right is the ML3B18W002 mentioned from taquitos on the previous page which does not match ML3Z18125BL that is on the sheet.
 

Attachments

  • left.jpg
    left.jpg
    186.6 KB · Views: 7
  • right.jpg
    right.jpg
    161.6 KB · Views: 7

SurfRaptor

FRF Addict
Joined
Dec 28, 2019
Posts
1,164
Reaction score
733
Location
Newport Beach CA
Following up on my last message with the work order from my dealer since I got my truck back today - hopefully it helps anyone going through the same. I still have some clunk in the fronts but since replacing the rears, I probably hear the clunk now 50% less of the time which is great. From the work order they only tested the rears so I will have to take it back eventually to get the fronts done. Overall, even with only the rears replaced, like many others have said, it rides much better and tighter like it should've from the start. View attachment 449909
Don’t waste time. Go back now and tell them immediately that it’s still got the problem. Then get the fronts replaced asap and post here a thank you for how amazing the truck you were supposed to get is.
 

SurfRaptor

FRF Addict
Joined
Dec 28, 2019
Posts
1,164
Reaction score
733
Location
Newport Beach CA
Adding mine in here as well for both the rears I got done today - Only one seems to match what was written on order sheet for me which is the Left Rear shock (ML3Z18125BN) and the right is the ML3B18W002 mentioned from taquitos on the previous page which does not match ML3Z18125BL that is on the sheet.
I wonder if the variations are just updated part numbers on paper but old part numbers behind because they were manufactured.
 

taquitos

Full Access Member
Joined
Feb 23, 2023
Posts
233
Reaction score
190
Location
Seattle
I wonder if the variations are just updated part numbers on paper but old part numbers behind because they were manufactured.
Or the current part numbers on paper for an already produced vehicle have fallen behind new production. Seems like a lot of part numbers exist for these shocks. I guess looking at a 24 on the lot would likely be the way to figure out which it is.
 

taquitos

Full Access Member
Joined
Feb 23, 2023
Posts
233
Reaction score
190
Location
Seattle
Anyone know what part numbers the new dual live valve shocks are? I looked up shocks for a 24 R VIN and got all sorts of stuff including ml3z18125bn/bl which are on my 35 so definitely not the right shock for that truck.
 

Kronos2300

Active Member
Joined
Jan 1, 2024
Posts
55
Reaction score
62
Location
South Florida
My rear shocks were replaced by the dealership after using the chassis ears on it, and the ride quality has improved exponentially! No more clunking on my end. For context, here's what they did:
Screenshot 2024-04-08 at 10.59.04.pngScreenshot 2024-04-08 at 10.59.14.png
And here are the shocks they installed (see attached). Mentioning the SSM 50972 worked, and they confirmed my truck was one of the ones affected by the issue. The shock numbers match that of the repair order, and again, the truck rides fantastic.

Even if I jump on the bed like some have done, there’s no clunking whatsoever. Hope this helps anyone still dealing with this issue!

Ps.: Wanted to note my truck has the 35's, not the 37's.
 

Attachments

  • IMG_3871-2.jpg
    IMG_3871-2.jpg
    181.9 KB · Views: 8
  • IMG_3872-2.jpg
    IMG_3872-2.jpg
    167.4 KB · Views: 8

Burt

Full Access Member
Joined
Dec 16, 2020
Posts
134
Reaction score
87
Location
Auburn, CA
my suspension started squeaking took it in and they lubed something, went away for a short time so took it back in and they said its the rear shocks which they ordered and should have next week - have a great service department at my local ford dealer
 

SurfRaptor

FRF Addict
Joined
Dec 28, 2019
Posts
1,164
Reaction score
733
Location
Newport Beach CA
I’m so happy this thread is helping people get the truck they paid for. Had mine out in Borrego Springs over the weekend. First time with the new fronts. Insane difference.
 
Top