Can anyone identify a loose part please?

[FlyingBear]

Hi folks,

I started to install my Baja Designs pocket fog lights. Looking up from under the truck, right above where the right-hand side bracket goes, I saw a loose part. It took a little wiggling to get it to drop out. There's no part number. Can anyone identify it please? Sorry for the rotated photos....can't seem to get them right. But the part looks the same in any direction.

Many thanks!

 

[CoronaRaptor]

Looks like a ********!

 

[Robtor310]

Looks like a ********!

with a weep hole....


Looks like some type of assembly tool or installation bumper for something...

 

[Azholley]

Looks like some sort of bump stop. Did you look for others placed around there?


Sent from my iPhone using Tapatalk

 

[NASSTY]

with a weep hole....


Looks like some type of assembly tool or installation bumper for something...

X2
It doesn't look like a part that goes to the truck.

 

[Kowboy17]

As long as it's taking for these trucks to get built, it must be the end to one of the line guys cane.

 

[hkguns]

I think you found the bowl to Leroy's bong. Don't get caught with that in your truck.

 

[FlyingBear]

Looks like a ********!

I know nothing of such things, but will rely on your obvious expertise on the subject

---------- Post added at 09:45 PM ---------- Previous post was at 09:42 PM ----------

Looks like some sort of bump stop. Did you look for others placed around there?

I agree: it looks like a bump stop. But it's also kinda, I don't know...not really automotive. Can't quite explain why. I looked around with a high output flashlight, but couldn't see anything like it, or where it might have come from.

 

[Firemedic269]

It looks like a bump stop. Does the white piece come off?

 

[FlyingBear]

It looks like a bump stop. Does the white piece come off?

Yes, it looks as if the two parts can be pulled apart.