Baja Designs Behind Grill Kit with Laser Hybrid

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,271
Reaction score
1,210
Finally got mine installed. These are awesome and I doubt I’ll be out driving these light. Thanks to SPV for all their help. They are awesome to deal withView attachment 448307

Wow! The lights look phenomenal!
I'm so glad you love them, and it all turned out as you had hoped.

Please let me know if I can ever assist with anything else!

Thank you for allowing us to earn your business!

Sidney @ SPV Parts
(317) 934-6778
[email protected]
 

bakwaas4eva

FRF Supporting Member
Supporting Member
Joined
Apr 26, 2024
Posts
119
Reaction score
54
Location
Nyc
Wow! The lights look phenomenal!
I'm so glad you love them, and it all turned out as you had hoped.

Please let me know if I can ever assist with anything else!

Thank you for allowing us to earn your business!

Sidney @ SPV Parts
(317) 934-6778
[email protected]
Hey SPV do you think this same set up will work with the 2024 Raptor R? I see the adjustable vents that they have behind the grille... would love to use this same exact setup since it's incognito
 

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,271
Reaction score
1,210
Hey SPV do you think this same set up will work with the 2024 Raptor R? I see the adjustable vents that they have behind the grille... would love to use this same exact setup since it's incognito

I do believe they should work the same. We know they changed the from Face of the grille, but I don’t believe they changed the rear shutters. It’s a refresh, not a new gen. So without physically testing it, I am 95% sure it will be the same.

Also, the Laser Hybrids are “built to order” but we do have 3 sets in stock!
I was trying to keep them around since they were so popular for these.

John
 

JustACowboy64

Member
Joined
Jan 27, 2024
Posts
38
Reaction score
32
Location
Dillon, Montana
Alright, I've held off on posting till I got everything properly aimed and did some testing. I reached out to @Specialtyperformanceparts to procure @Baja Designs Laser Hybrid light bars to run with their behind grill kit along with the S2 Pros spot/ cornering for the fogs #allthelight.

After installing with the provided SPV harnesses (Shout out to John and Sydney!) I made the unfortunate error in tightening the light bar too much which resulted in having to pull everything apart when it came time to aim them. So don't do what I did, check you can move them before putting everything back together. Aside from that install was super easy.

Alright, enough talking time for pics.

All buttoned up at my buddy's shop
View attachment 428077
First night home before aiming
View attachment 428073
Baja S2 Pro only with no ambient light in a neighborhood under construction.
View attachment 428074
Laser Hybrid only pushing light into a complex lighting environment 600 yards out. Down range report was that there was light on the house at the end of the street just can't really rectify with the naked eye.
View attachment 428075
Laser Hybrid only at my local range 500 yards. Not the best pic but I could positively ID the steel target at 500 yards. At 600, I could see something was there, but I was unable to rectify what it was with the naked eye.
View attachment 428076
All distances were lazed with a Vortex Razor HD 4000 Laser Rangefinder.

For those unfamiliar, the 10 inch laser hybrid (2 in the behind grill kit) have 2 Laser drivers, 2 racer spots, and if I'm not mistaken, 2 driving combo on each bar. This gives you a nice balance to fill multiple zones with one bar. If you are familiar with Baja's zones, this fills zones 3, 4, 5 & 51. With the s2 pro spot and wide cornering, it fills zones 1 & 2.

Overall the two 10 inch Laser hybrids provide a very well rounded lighting package. The only thing I'm looking to add in the future would be LP4s on the A pillar. I feel this is the only zone I'm missing going through corners. The laser in this size isn't overwhelming with the hot spot either where it would become visually distracting. Make no mistake though, this thing puts out light. Just remember, it's not all about Lumens, this only tells part of the story with lights.

Hope it all makes sense, I wanted to put out some info on these lights being I don't see a ton of people running these (I suspect due to cost). These lights were paid for by me and the only discount were the normal ones SPV offers with no promises of my thoughts or review. My frame of reference on lights and lighting technology is from the firearms industry where like the automotive industry, originally started out all about the lumens. I will give credit to Baja, they are the few who make a good attempt at conveying ratings to really tell you what the light is doing down range.
Great review! SPP forwarded it to me for my decision process. Now that you have run them for over a year. Any additional comments??
 
OP
OP
S

Sparda1123

Active Member
Joined
Apr 29, 2021
Posts
87
Reaction score
132
Location
Orlando, FL
Great review! SPP forwarded it to me for my decision process. Now that you have run them for over a year. Any additional comments??
Honestly, no regrets.

I need to hit them up to finish out my lighting package but I've been chasing the go fast bug lately and working with a few companies behind the scenes on some stuff for our generation of Raptor. I want to get @Specialtyperformanceparts to do a custom harness for a lighting package I have in mind/ don't see folks run often using baja designs of course. But seriously, don't look back. It's ridiculous the amount of throw these lights have that I need to be considerate of oncoming traffic a mile away.
 
Top