37s v 35s, any hard evidence?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Frank N

FRF Addict
Joined
Apr 15, 2017
Posts
4,531
Reaction score
15,042
Location
NJ and Outerbanks
Saw 40s at KHC last week...and it was built to use them....who runs front bump stops ...

now if Ford runs the Baja 1000 it will be interesting to see which one they take...and if they don’t go, it may be a bigger statement.
 
OP
OP
MDJAK

MDJAK

FRF Addict
Joined
Feb 23, 2019
Posts
5,075
Reaction score
7,284
Location
NY
Not concerned with height but I specifically lengthened my garage by 3’ to accommodate truck. And now I don’t even park it in there.
 

heybear

Full Access Member
Joined
Jul 5, 2021
Posts
189
Reaction score
352
Location
bend, or
37 = one less inch travel. One extra inch sidewall.

I wouldn’t run any more or less psi between the two tire sizes. But, I’ll take the extra ground clearance and sidewall.

The larger diameter also helps smooth things out over rocks ans square edged terrain. Our fire roads here are littered with rocks. Much like a 29 vs 26” MTB.
 

RotorOver

Full Access Member
Joined
Jun 28, 2021
Posts
434
Reaction score
688
Location
Greater Atlanta
What I'm curious about and have not heard it addressed is why Ford did not make a change to the gear ratio or at least offer an option to a shorter gear set when offering the 37" tires. Did I miss that?
 

heybear

Full Access Member
Joined
Jul 5, 2021
Posts
189
Reaction score
352
Location
bend, or
What I'm curious about and have not heard it addressed is why Ford did not make a change to the gear ratio or at least offer an option to a shorter gear set when offering the 37" tires. Did I miss that?
fair question.

35 to 37 is more like a 6% jump.

the next gear ratio up from 4.10s is 4.56., which is more like 10% leaving final gearing a bit shorter than it would be.

and honestly, the difference in actual RPMs between 35s and 37s is really nothing.
 

RotorOver

Full Access Member
Joined
Jun 28, 2021
Posts
434
Reaction score
688
Location
Greater Atlanta
fair question.

35 to 37 is more like a 6% jump.

the next gear ratio up from 4.10s is 4.56., which is more like 10% leaving final gearing a bit shorter than it would be.

and honestly, the difference in actual RPMs between 35s and 37s is really nothing.
Copy. I suppose for a high speed desert runner maintaining the top end speed may be more important to them than the 10% torque gain they'd also see with the shorter set.
 
Top