2024 Raptor | Baja Designs LP4 | SDHQ | SPV

[mleaky]

Installed some Baja Designs LP4's.

-SDHQ A Pillar Ditch Light Brackets
-Baja Designs LP4's, amber backlight
-SPV A Pillar harness. Ran the harness under the cowl and in between the fender where it mounts, towards the A pillar.
-SPV running light harness
-ARP 12pt Bolts and Nuts. The plan was to lockwire the bolts, but I broke the only 1/16 bit I had.
-Used some left over Gray Techflex and Shrink tubing from a KTM wiring project
-4 way zip tie mounts and zip ties. Mounts are under the cowl.

Running light harness routing under the plastic cover


Laying out the A pillar light harness location






Prettied up the light harness a bit


LP4's with ARP Hardware(Orange Locktite)




Final Product. Just need to adjust the lights a bit more and buy the LP4 side reflector covers

 

[TXchris]

Looks good! I'm very indecisive on the XL80's or LP4's. Then I have to figure out if I want Clear or Amber... LP4's look good on your truck.
Thanks for sharing.