2023 Forscan Issues

[laramie1pt8t]

Hello, I have a 2023 Raptor and I did the Heated Steering wheel add, and for some reason I some how bricked the HVAC, it no longer shows power or does anything. I don't know how to get it back.

Do you think you or someone can help me

Did you try loading the as-builts? It will at least let you control the fan with the as-builts loaded, it wont let you change the temperature. Also, recheck your connections, maybe you have a loose plug?

 

[east raptor 22]

im trying to do the glare free mod but whenever i try to writ in HCM module it refuses? Even though i have the glare free option on the big screen?

 

[DougDimmadome]

im trying to do the glare free mod but whenever i try to writ in HCM module it refuses? Even though i have the glare free option on the big screen?

I had the same issue, and this is what forscan support suggested. Despite their warning it has been working for me flawlessly

Hello,

The adapter you use is not recommended for configuration and programming, FORScan should notify you about it on the start. The problem is that it works on 38400 baud rate that is not enough for this adapter and this operation. You may try to increase the baud rate as explained in this article:

https://forscan.org/forum/viewtopic.php?f=4&t=1763

But some china adapters do not support higher baud rates, so this trick may not work.

--
Regards,
FORScan Development Team

 

[east raptor 22]

I had the same issue, and this is what forscan support suggested. Despite their warning it has been working for me flawlessly

Thank you for your reply, i just realized that my issue was totally different (putting right numbers in the wrong place)
But until now when forscan start contacting to the vehicle i saw there’s error in some modules (dtc.hcm.sccm) is that normal?

 

[Littlefx4]

Thank you for your reply, i just realized that my issue was totally different (putting right numbers in the wrong place)
But until now when forscan start contacting to the vehicle i saw there’s error in some modules (dtc.hcm.sccm) is that normal?

Glad to hear that you caught it. Always double check & triple check your work. Good on ya.

 

[DougDimmadome]

Thank you for your reply, i just realized that my issue was totally different (putting right numbers in the wrong place)
But until now when forscan start contacting to the vehicle i saw there’s error in some modules (dtc.hcm.sccm) is that normal?

My issues were with writing to the sccm and changing the baud rate fixed it