5 point harness? Possible without a cage?

Yukon Joe · Apr 14, 2013

Thanks for all the great ideas guys.
Here is my take on it. I connected the bolt in Corbeau harness into the stock seat belt locations. The lap belts were fairly straight forward. Although to get to the inner bolt, I had to loosen the center console and lift it.

The rear I tied into the C-post shoulder harness location.

This is my solution for running rough bumpy offroad, but this is in NO WAY a replacement harness for the stock seat belt.

Here is the outside bolting location:

access to the interior seat belt location with the center console propped up.

Here is the c-piller bolt location

Wilson · Apr 14, 2013

I don't know about the harness's. I have a bad feeling about them. Maybe it's the false sens of security? they look cool tho

beemerman · Apr 14, 2013

Secretary's can be hot

Sent from my iPad using Tapatalk HD

Wilson · Apr 14, 2013

whoops security

OrangeAddict · Aug 13, 2013

Anyone have any ideas on how to mount this similar to what YJ did on the C Pillar, similar to what YJ did with the non-retractable unit?

justvettn said:
I have this one in one of my Rigs and like it. You will have to drill a hole in the floor behind the seat to attach it.

RaptorWifey · Aug 13, 2013

I believe Joe posted a write up somewhere orange.... Doh.. In this thread, http://www.fordraptorforum.com/showthread.php?p=415477 post, message, or call him with any further questions.

Sent from my VS920 4G using Xparent Purple Tapatalk 2

OrangeAddict · Aug 14, 2013

RaptorWifey said:
I believe Joe posted a write up somewhere orange.... Doh.. In this thread, 3 or 5 Point Harness Solution Sans Cage? - Page 2 - FORD RAPTOR FORUM - Ford SVT Raptor Forums - Ford Raptor post, message, or call him with any further questions.

Sent from my VS920 4G using Xparent Purple Tapatalk 2

yeah, i got a set of retractables by accident so I was trying to see if anyone had any ideas about a mounting solution before i try to get the returned for what i really intended to buy. I spent some time this evening looking at how i might go about it and really have not came up with much so far.

The original intent was to duplicate Joe's setup. ( best form of flattery)

RaptorWifey · Aug 14, 2013

I ordered the wrong ones at first. I ordered the clip in ones instead of the bolt in...or vice versa or something like that. They returned them easy peasy and we got the right ones.

Raptizzle · Aug 14, 2013

Wilson said:
I don't know about the harness's. I have a bad feeling about them. Maybe it's the false sens of security? they look cool tho

I'm gonna side with Wilson on this. At least get a simple bolt in cage like what RPG sells if this is your cup of tea. Bottom line is if you're driving fast and aggressive enough for the need to keep your ass planted in the seat, than you're driving fast enough to do a couple unexpected rodeo flips too.

RaptorWifey · Aug 14, 2013

We did it for my back.... (don't sit in the back seat of a screw while jumping) keeping me planted is crucial even for moderate offroading. Yukon takes it easier when I'm in the truck obviously, but I wouldn't have made it a quarter lap at TRR without the harness. It was great! Didn't budge in the seat.

Is it going to protect you in a crash?... Eh, with how Joe mounted ours using the seat belt mounts in the pillers its just about as safe as regular seat belts. But they are not used at all on road, only offroading!

But you are right that its not a license to drive like a moron, for us, its about comfort and not hitting your helmet on the roof.

Sent from my VS920 4G using Xparent Purple Tapatalk 2

5 point harness? Possible without a cage?

Yukon Joe

FRF Addict

Wilson

FRF Addict

beemerman

FRF Addict

Wilson

FRF Addict

OrangeAddict

FRF Addict

RaptorWifey

FRF Supporting Member

OrangeAddict

FRF Addict

RaptorWifey

FRF Supporting Member

Raptizzle

FYT

RaptorWifey

FRF Supporting Member

Similar threads

Staff online

Members online

Forum statistics

Latest posts