Yay or nay?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
MORaptor1

MORaptor1

Full Access Member
Joined
Jul 13, 2023
Posts
321
Reaction score
232
Location
SW Missouri
The only issue.....is that the 4 inner clips had to be trimmed and of course a lot of the honeycomb is gone. So the thin upper and lower stretches (above the below the light) are flimsier than i would like. Trying to come up with a fix, but for now they are double side taped to the corresponding bumper sections.
 

MurderedOutSVT

Brodozin
Supporting Member
Joined
Apr 17, 2021
Posts
13,690
Reaction score
44,825
Location
The ATL
The only issue.....is that the 4 inner clips had to be trimmed and of course a lot of the honeycomb is gone. So the thin upper and lower stretches (above the below the light) are flimsier than i would like. Trying to come up with a fix, but for now they are double side taped to the corresponding bumper sections.
Looks good!


Build up the flimsy part with JB Weld? Maybe from behind so it wont be seen, or a light coat from a rattle can?
 
Top