WSI Springs on their way!!

[TAZMAN]

The drop shackle is labeled 1 or 2 inch drop but I needed another hole to get what I wanted. If the springs settle more then I may need to go another direction. It's just a big puzzle and the pieces have to fit just right!!lol

 

[NickPic83]

So WSI includes a shackle that have the option to drop 1" or 2" and u wanted more like a 3"?

Sent from my XT1080 using Tapatalk

 

[Yukon Joe]

^ that's what I was wondering. But he's on mid perch and wanted +1.5" in the rear.
What where the WSI springs arched at?

Yukon Joe
www.RUNRAPTORRUN.com

 

[NickPic83]

I am very curious as that is pretty much what I want a 1.5"-2" rise in the rear all said and done after settling of course

Interested in pics too because I will also be staying on mid perch

Sent from my XT1080 using Tapatalk

 

[DocSpooK]

I promise, WSI springs will lift the rear 2-3". The lowering shackle is to get you back to a more nirmal height. When the rear is that much talker than stock the stock shocks are out of range so they do not damp small bumps as well as at stock height. Not a large issue for me, I have 7000 miles on mine, jumped it and did the Snoball with no issues. Totally go for it!
Guess which one is stock


Sent from my iPhone using Tapatalk

 

[TAZMAN]

The extra hole I made was to raise the back another 1 inch. Just because the shackle says it lowers the truck 1-2 inches over stock, it all depends on how much the springs raise the truck. In my case, I wanted the rear of the truck to sit 1.5 inches above the front so for my truck, I needed another hole to raise the back more. The stock shackle raises the rear to high but may be ok once the springs settle down but right now it looks awesome.

 

[Chayse]

Do you have have pictures so we can see what you have done? It may make it a little clearer. Thanks.

 

[tbone]

this weekend i went on a run and my truck is sitting on mid perch and the wsi springs i had in the bed a second spare for my truck on a tire gate with a bed rack that holds 2 tool boxes and a jack and 2 5 gallon cans of gas with my buddys mounted 35 grabbers (all 4) and my truck was sitting mabey .5 of an inch to an inch below completly level. you can hardly tell. im not running the drop shackle either. im just telling you guys this so you can hopefully get an idea of how arched these springs are they do an amazing job with weight in the rear.

 

[TAZMAN]

I can send someone the pictures to post so you can see what I'm talking about. If you carry a couple hundred pounds of weight then the stock shackles may work. If you live close to Indy, feel free to stop by and see the set up.

I am very pleased with how the springs changed the drive characteristics of the truck. They should come from Ford like this.

 

[NickPic83]

I can send someone the pictures to post so you can see what I'm talking about. If you carry a couple hundred pounds of weight then the stock shackles may work. If you live close to Indy, feel free to stop by and see the set up.

I am very pleased with how the springs changed the drive characteristics of the truck. They should come from Ford like this.

can u send me some pics, especially of the shackle? [email protected]