GEN 2 Wheel Sizing Advice Needed (offset)

[smurfslayer]

Well, being that I’m in a raptor forum. You have any info that can help me? Or….

Sure.

Don’t do it. It’s simple, elegant and appropriate in this case.

The stock Raptor offset is +34mm Just going to zero offset pushes the wheels out 1.34” and on a Jen Too, it will require mods to fit them without ‘rubbing’ other components. You’re talking about a potential 1.69” outside the fender flares. And you’re proposing wheels that are 3.5” wider than stock, possibly contributing even more.

You’ll be chasing this kind of mod with other necessary mods to keep the vehicle road worthy; cutting a tire, ruining a brake line are distinct possibilities here. So the cost to install this kind of “modification” will be much more than the cost of the wheels & tires.

Like @Nex illustrates with the picture here, zero offset is the max you want to take a Jen Too truck

 

[5280 Raptor]

Interesting thread. Today I'm having a set of TIS Offroad wheels installed on the factory tires. 17x9, -11 offset. I hope I like them, if not OEM wheels go back on

 

[XSTNKT]

I'd go 22x12 with a -44 offset, myself..... you may need 2" spacers too.

 

[nikhsub1]

You aren't going to fit a 12" wheel, period. Best bet is do to an 8.5" or a 9" wheel with 0 offset.

 

[Old-Raptor-guy]

If you move the entire wheel tire combination outside the fender it can't rub on anything.

 

[Nex]

If you move the entire wheel tire combination outside the fender it can't rub on anything.

Except maybe the back door.

 

[smurfslayer]

What offset does Fred run?

 

[Bracamonte]

+1 for the 0 offset. I haven’t had any rubbing issues. I do have Geiser, springs though.

 

[jryoshi]

I did 22x11 with a 0 offset. Unsure if that’s gonna work but I think it’s too late to change anything as of now

 

[Sig Fanboy]

Let us know how those rims work out. I think you are gonna rub… everywhere.