What did you do to your Raptor today? (Gen2)

[Hal993]

I put Kilmat on the entire rear of the cab bottom to the window. Having done both front doors with Block-Off Plates, now I can clearly hear road noise and it is obvious that it's from the rear doors... hahahaha... they are next!

I'll probably do the floor at some point, but not anytime soon. The carpet/pad is actually pretty thick and decently dense.

 

[jAKe47]

5% tint all the way around, 70% on the whole windshield with a 5% strip and had them put 15% on the sunroof.

 

[35TT]

https://flic.kr/p/2pj41GR

Picked up a couple ford swing cases. Happy with the quality and functionality.

 

[Trail_Rider]

Added some new Carbon Fiber overlays:

 

[Sharpie69]

I put Kilmat on the entire rear of the cab bottom to the window. Having done both front doors with Block-Off Plates, now I can clearly hear road noise and it is obvious that it's from the rear doors... hahahaha... they are next!

I'll probably do the floor at some point, but not anytime soon. The carpet/pad is actually pretty thick and decently dense.

I put Kilmat on the entire rear of the cab bottom to the window. Having done both front doors with Block-Off Plates, now I can clearly hear road noise and it is obvious that it's from the rear doors... hahahaha... they are next!

I'll probably do the floor at some point, but not anytime soon. The carpet/pad is actually pretty thick and decently dense.

I just finished putting the dynamat and blockoff plates on all four doors, the rear wall is going to be my next project. About how many square feet did you need for that area? TIA

 

[Hal993]

I just finished putting the dynamat and blockoff plates on all four doors, the rear wall is going to be my next project. About how many square feet did you need for that area? TIA

So.. TBH, I don't know. Kilmat is 10"x16" sheets. I (think I) used 7 vertical from bottom to top, and then 4 horizontal across the top? so 11 pieces did the whole rear wall - obviously the top row is cut down to about 6"x16".

haha... so now I do know... I THINK 12.2sq ft.

(2) 35sq ft Killmat boxes did my son's whole trunk and rear decklid.. with a lot of double coverage, my Raptor front two doors and whole rear wall. I am hopeful to get (1) of the rear doors out of the last few whole pieces.

 

[Sharpie69]

So.. TBH, I don't know. Kilmat is 10"x16" sheets. I (think I) used 7 vertical from bottom to top, and then 4 horizontal across the top? so 11 pieces did the whole rear wall - obviously the top row is cut down to about 6"x16".

haha... so now I do know... I THINK 12.2sq ft.

(2) 35sq ft Killmat boxes did my son's whole trunk and rear decklid.. with a lot of double coverage, my Raptor front two doors and whole rear wall. I am hopeful to get (1) of the rear doors out of the last few whole pieces.

I used every bit of a 36 Sq ft box doing the four doors, the first two doors could have used a bit more, I'm happy with the outcome of that and the Block-Off Plates.
Did you wrap the sub woofer? I've read about that and will do it the same time as the back wall

 

[Hal993]

I used every bit of a 36 Sq ft box doing the four doors, the first two doors could have used a bit more, I'm happy with the outcome of that and the Block-Off Plates.
Did you wrap the sub woofer? I've read about that and will do it the same time as the back wall

I did not wrap the subwoofer! Let me know how it goes, as that would be a relatively easy thing to do. BTW... I probably do not do as "complete" a job as most will. I do my best to cover the panels (interior and exterior for doors), but coverage is not 100%. If I get to a difficult spot, I aim to reduce resonance (tap method) and move on.

 

[kalel]

Added some new Carbon Fiber overlays:

View attachment 434866
View attachment 434867

View attachment 434868

I love the CF. Kinda irritated the weave is different on the Raptor emblem. I love the red R but with the Raptor R out I figured I’d do it if I upgraded turbos

 

[Gdog]

B pillar carbon overlay