What did you do to your Raptor today? (Gen2)

[Sloracer]

For me, getting the bezels on was a PITA. The lights go on pretty easily once the bezels are installed. I can tell you I ended up using the following spacers and washers:

• On the Driving/Combo and the SAEs, I used 2 thick washers, spacer, and a thin washer above the bracket and a thin washer below the bracket, along with the locking nut.
• On the S1s, I used 2 thick washers and a thin washer above the bracket, and a thin washer below the bracket, along with the locking nut.

Of course it may differ for you, but that's what worked for me. I also bought some longer bolts today because with all of the above, I had about a single thread left and didn't like that.

Did you have to purchase or dig up the washers/spacers from the garage or did they come with the ORA kit? Great info by the way, I'll pick up some additional supplies BEFORE I start the project instead of half way thru the project like normal!

 

[dblack]

Did you have to purchase or dig up the washers/spacers from the garage or did they come with the ORA kit? Great info by the way, I'll pick up some additional supplies BEFORE I start the project instead of half way thru the project like normal!

It came with all of the washers and spacers. Plenty of those actually. The bolts are 1/4-20 and M8-1.25 I believe, then you can just get whatever length will work for your spacer and washer setup.

 

[LF LandShark 2818]

Installed Rigid SR-L Spreader for back up lighting to go with the 20" Rigid SR-L up front. Just as the amber matches the front headlight surround/marker lights perfectly, the rear lights also match the outline of the tail lights/marker lights.

 

[LeadFootLarry]

@LF LandShark 2818 looks great. What front bumper btw?

 

[LF LandShark 2818]

@LF LandShark 2818 looks great. What front bumper btw?

Thank you very much! ADD Pro Bolt-On. Not my first choice by any means but i felt it was the best option that allowed me to not cut the frame.

 

[K223]

Installed Rigid SR-L Spreader for back up lighting to go with the 20" Rigid SR-L up front. Just as the amber matches the front headlight surround/marker lights perfectly, the rear lights also match the outline of the tail lights/marker lights.

View attachment 162627 View attachment 162628 View attachment 162629 View attachment 162630 View attachment 162631

Everytime I see this damn bumper
I go maybe very soon! Looks great.

 

[Sloracer]

Everytime I see this damn bumper
I go maybe very soon! Looks great.

Exactly.....

 

[Boost_it638]

@LF LandShark 2818 do you have pics from the side of the front bumper. Nice looking set up!

 

[nikhsub1]

Installed a QI charger/holder and routed the cable into the dash and to the glovebox where i have a usb plug from my phoenix radio. I had to cut a small notch in the front driver corner of the upper tray.








Sent from my iPhone using Tapatalk Pro

 

[LF LandShark 2818]

@LF LandShark 2818 do you have pics from the side of the front bumper. Nice looking set up!