Badgertits
FRF Addict
Installed ronin tailgate assist - nice addition, wish I had the tailgate step though!!!
had it ok ‘18 miss it on the ‘20
had it ok ‘18 miss it on the ‘20
What did you do to your Raptor today? (Gen2)
- Thread starter Jepper
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Non step equipped tailgates do not include any dampening? Or lift assist? They will just freely drop?
Last edited:
Installed CVF Titan IC, Boomba adapter, and ADD Pro Bolt On v2.
Need to talk to ADD on Monday about the 2 bolts they include to replace in the IC mounting bracket. The instructions conveniently leave out the steps for holding up the IC while running the new bolts through the skid plate and mounting bracket.
tahoeacr
Full Access Member
My '19 non-equipped tailgate step has damping. I'd give up the damping for a tailgate step. lol.
GCATX
King Dingaling
I wondered about that too.
PCDESERTstyle
Member
Hello all,
I recently found this forum and was hoping someone could help me out. I'm installing baja designs light pocket kit and can't find the amp requirements to figure out if I have to use both 15 amp wires to run the 6 lights. If I run 4 lights on 15 amp, then I should be able to run the other 2 on a ten? Also has anyone played with which lights to group and which to put on second switch for the best results.
My rig 2019 Screw magnetic 802A carbon fiber and technology package. Eibach springs in front and whipple stage 1.
Thanks for the help
I recently found this forum and was hoping someone could help me out. I'm installing baja designs light pocket kit and can't find the amp requirements to figure out if I have to use both 15 amp wires to run the 6 lights. If I run 4 lights on 15 amp, then I should be able to run the other 2 on a ten? Also has anyone played with which lights to group and which to put on second switch for the best results.
My rig 2019 Screw magnetic 802A carbon fiber and technology package. Eibach springs in front and whipple stage 1.
Thanks for the help
zombiekiller
OG BooBooRunner
did you get pro lights or sport lights? The amp draw is different between the two and may impact any guidance.
PCDESERTstyle
Member
the unlimted kit
PCDESERTstyle
Member
squadron pro and race
zombiekiller
OG BooBooRunner
each squadron pro will draw 3.33 Amps.
Depending on which upfitter you use, they can take 15A, 10A or 5A.
I like to plan for 30% buffer.
So for my porpoises, I'd say a pair of lights on 3 separate upfitters is the way to go.
I didn't see a spec sheet on the race versions of the lights, so I'd assume they draw 3.5 A or something close.
Similar threads
