What did you do to your Raptor today? (Gen2)

[Badgertits]

Will do. Just waiting to get my truck back from the shop for the matte wrap and tint.

I was really torn about witch kit to get. I liked the bezel due to the fact that it looked "finished". I had some concerns about the farings cutting off the light beam but Offroad Alliance assured me that they wouldn't. I also got the light guards wheel well extensions.

I have this kit- albeit w/ different lights- & the position of the fairings doesn’t effect the output at all. I also liked it because it really looks as if it came that way from the factory- I purchased during cyber Monday last year so got the rear protective pieces w/ the set- I think they did they’re job fairly well over the winter.

I have 2 rigid radiance fogs each side w/ Amber halo effect & 1 set of KC hi-lites w/ amber lens. Upfitters 1&2 turn on the full fog light function on the 2 sets rigid cubes, #3 activates only the halo function on both sets & #4 controls the KC hi-lites

 

[Denvertaco07]

Washed
Removed front license plate holder - drill out rivets.
Installed Swarfworks front plate mount
Installed RockBlokz flaps - front only, need ratcheting screw driver for rears. I don't get why they used the hardware they do, i had to paint the screw heads black, not a big deal cuz I had the paint, and then they use phillips screws instead of like a hex head that i could use exising tools to install, but anyway fronts look great and were very easy to install.

 

[CDN_Raptor]

I have this kit- albeit w/ different lights- & the position of the fairings doesn’t effect the output at all. I also liked it because it really looks as if it came that way from the factory- I purchased during cyber Monday last year so got the rear protective pieces w/ the set- I think they did they’re job fairly well over the winter.

I have 2 rigid radiance fogs each side w/ Amber halo effect & 1 set of KC hi-lites w/ amber lens. Upfitters 1&2 turn on the full fog light function on the 2 sets rigid cubes, #3 activates only the halo function on both sets & #4 controls the KC hi-lites

Good to know re: light cut-off. Thanks for commenting!!

I went with BD S1 with amber covers on upfitter 1 (I figured I'd be using these the most so I wanted it at the closest switch)
BD SAE wide cornering in the middle on upfitter 3
BD Squadron Pro driving combo on the inside, on upfitter 4

I left #2 upfitter empty for the higher amp rating for any accessories in the future.

How did you find aiming your lights with the fairings?

 

[raptorpaul]

Install builtright ind. dash mounting system to accommodate the GoPro and iPad for navigation.





Sent from my iPad using Tapatalk

 

[Badgertits]

Good to know re: light cut-off. Thanks for commenting!!

I went with BD S1 with amber covers on upfitter 1 (I figured I'd be using these the most so I wanted it at the closest switch)
BD SAE wide cornering in the middle on upfitter 3
BD Squadron Pro driving combo on the inside, on upfitter 4

I left #2 upfitter empty for the higher amp rating for any accessories in the future.

How did you find aiming your lights with the fairings?

Lol - well I live like 20 mins from there MA location so they installed for me while I waited took no time at all. Getting them aimed isn’t a big deal I tweaked slightly since installed you can reach around back w/ Allen wrench loosen em a bit enough to reposition as needed. Park on flat surface w/ lights pointed at a wall or garage door. They used toy suction cup type darts stuck on the middle of the lens to really fine tune them- good idea

 

[CDN_Raptor]

Lol - well I live like 20 mins from there MA location so they installed for me while I waited took no time at all. Getting them aimed isn’t a big deal I tweaked slightly since installed you can reach around back w/ Allen wrench loosen em a bit enough to reposition as needed. Park on flat surface w/ lights pointed at a wall or garage door. They used toy suction cup type darts stuck on the middle of the lens to really fine tune them- good idea

Hopefully I can fit my hand in there to adjust them. I also got the fender liner extensions installed.

 

[911 Crazy]

Install builtright ind. dash mounting system to accommodate the GoPro and iPad for navigation.





Sent from my iPad using Tapatalk

Super nice. Please elaborate on the use of the iPad. Is it in lieu of the on board screen? Also, where did you get the carbon kit? It looks great!

 

[nikhsub1]

It's just a mounted ipad...

 

[tom wansor]

Rappy graphics vinyl. Not sure if I am going to keep it on. Will have to give it a couple of days.

 

[dblack]

A little behind, but two weekends ago we got out and explored some historic covered bridges. One of which is the the longest in the state and one of the longest existing in the US, and the other is the highest over any US waterway.