What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Badgertits

FRF Addict
Joined
Jan 24, 2019
Posts
2,803
Reaction score
2,445
Location
Ma
Can you do my truck next?

With the AMSOIL, did you have to clean/prep area before spraying it on?
Lol - yeah $50/hr hahaha

I pressure washed the undercarriage pretty good @ a car wash bay couple days prior, then took some rags & soapy warm water wiper everything down (didn’t soak it- just enough to get residual dirt off) then waited a bit for it to air dry & wiped any wet spots w/ dry rags & then did a quick blow down w/ compressed air. There was plenty of breeze too.

I hit up the diff/axles w/ wire brush & sandpaper then wiped down the residual dust/rust w/ tack cloth. Protected shocks/wheels w/ cut up paper grocery bags & drop cloths & sprayed the rustoleum.

Only thing I protected were the insides of wheels & shocks & lower A-arms when I sprayed the Amsoil- unless you’re 6+ beers deep you shouldn’t have a problem getting onto exterior paint/door panels, I got a little overspray on the wheel wells but wiped it up.


Also- found out the Amsoil HDMP is AWESOME @ cleaning/polishing the black exhaust tips & recovery hooks- sprayed a rag down w/ the Amsoil & wiped me down like I was using metal polish- check it out!

Lastly- when everything else was done I hit the shocks up w/ automotive clear coat to keep em from getting pitted/oxidized badly. I didn’t really care about overspray w/ that stuff

DB75CF8D-2345-4693-89C7-BDA7D235C6CF.jpeg
 

ddpt

Full Access Member
Joined
Aug 7, 2018
Posts
748
Reaction score
480
Lol - yeah $50/hr hahaha

I pressure washed the undercarriage pretty good @ a car wash bay couple days prior, then took some rags & soapy warm water wiper everything down (didn’t soak it- just enough to get residual dirt off) then waited a bit for it to air dry & wiped any wet spots w/ dry rags & then did a quick blow down w/ compressed air. There was plenty of breeze too.

I hit up the diff/axles w/ wire brush & sandpaper then wiped down the residual dust/rust w/ tack cloth. Protected shocks/wheels w/ cut up paper grocery bags & drop cloths & sprayed the rustoleum.

Only thing I protected were the insides of wheels & shocks & lower A-arms when I sprayed the Amsoil- unless you’re 6+ beers deep you shouldn’t have a problem getting onto exterior paint/door panels, I got a little overspray on the wheel wells but wiped it up.


Also- found out the Amsoil HDMP is AWESOME @ cleaning/polishing the black exhaust tips & recovery hooks- sprayed a rag down w/ the Amsoil & wiped me down like I was using metal polish- check it out!

Lastly- when everything else was done I hit the shocks up w/ automotive clear coat to keep em from getting pitted/oxidized badly. I didn’t really care about overspray w/ that stuff

View attachment 123198
That was a bit of work but it looks great.

Thanks again.


Sent from my SM-N960U1 using Tapatalk
 

Kashoggio

Lives in a van down by the river.
Joined
Jan 28, 2018
Posts
515
Reaction score
532
Started to install the Baja Design S2 rear lights and after I mounted them, took them right off. Don’t love the look, too close to the exhaust and def takes away from the dual exhaust look. a9d7fb60d62d07f97decab7bbd3d098a.jpg


Sent from my iPad using Tapatalk
 

FordPerf Addict

FRF Addict
Joined
Aug 24, 2016
Posts
1,446
Reaction score
605
Started to install the Baja Design S2 rear lights and after I mounted them, took them right off. Don’t love the look, too close to the exhaust and def takes away from the dual exhaust look. a9d7fb60d62d07f97decab7bbd3d098a.jpg


Sent from my iPad using Tapatalk
Gonna flush mount them in the bumper instead? Kinda wish I thought of that before but I’m still very happy with mine in the place where yours are


Sent from my iPhone using Tapatalk
 

FordPerf Addict

FRF Addict
Joined
Aug 24, 2016
Posts
1,446
Reaction score
605
... that does raise a question tho... do larger exhaust tips interfere with the S2s mounted next to the exhaust pipes like it was shown in the pics ??


Sent from my iPhone using Tapatalk
 

Kashoggio

Lives in a van down by the river.
Joined
Jan 28, 2018
Posts
515
Reaction score
532
Not sure what I’m going to do but I can’t see myself adding them there.
 
Top