What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ZBoater

FRF Addict
Joined
Mar 9, 2014
Posts
1,980
Reaction score
866
Its just DEI gold reflective tape on the cold air intake. I don't like the way it looks but it keeps intake air temps down

Sent from my XT1080 using Tapatalk


Hey, I tried that trick with 3M reflective tape and it seemed to help! I was watching the intake temps on my Roush CAI go up like crazy while idling as reported my my OBDLink, and this definitely slowed it down. Not attractive but functional and cheap. Thanks for sharing!

e6esamaj.jpg
 

Raptor Embroidery

aka <b><font color='darkorange'>Raptor_Al_41</font
Joined
Jan 23, 2012
Posts
3,959
Reaction score
1,433
Location
Scottsboro, Alabama
Hey, I tried that trick with 3M reflective tape and it seemed to help! I was watching the intake temps on my Roush CAI go up like crazy while idling as reported my my OBDLink, and this definitely slowed it down. Not attractive but functional and cheap. Thanks for sharing!

e6esamaj.jpg

I like that as well! It does make a difference!

Sent from my XT1080 using Tapatalk
 

jcl48

Full Access Member
Joined
Jan 5, 2014
Posts
286
Reaction score
99
Location
South Florida
Hey, I tried that trick with 3M reflective tape and it seemed to help! I was watching the intake temps on my Roush CAI go up like crazy while idling as reported my my OBDLink, and this definitely slowed it down. Not attractive but functional and cheap. Thanks for sharing!

e6esamaj.jpg
That looks weird, but since it lowers the intake temperature, I might be tempted to ceramic coat, my intake tube of the AFE Stage2 system I got
 

13raptorcrew

Full Access Member
Joined
Jun 4, 2014
Posts
463
Reaction score
435
Location
Forest Lake, MN
41,450 miles; oil change tire rotation an alignment. The dealers rack was not big enough for the Raptor (width) so did oil change only. Took front skid plate all the way off so it wasn't messy. Decided since I was under there to check the front diff fluid level/condition. Fluid was overfill, (oozing out of the fill hole) and was very milky. Changed the fluid and checked the rear diff. Rear was clean. Other owners might want to check theirs.
 

Attachments

  • image.jpg
    image.jpg
    94.3 KB · Views: 115

Vash

FRF Addict
Joined
Mar 13, 2011
Posts
1,009
Reaction score
469
Location
OK, USA
There's gotta be some additive or odd kind of lube Ford used for initial fill of the front diff. Every single person including myself that's changed the fluid early has found grey and/or milky lube in the front diff. I swapped both front and rear diff fluids for Amsoil Severe Gear synthetic at 30,000 miles. Still contemplating doing a transmission flush early as well.
 

ZBoater

FRF Addict
Joined
Mar 9, 2014
Posts
1,980
Reaction score
866
Put the leftover insulation to good use. My front bumper is all scratched up from having to hit my garage wall in order to fit my Raptor. I put cardboard on the wall but it didn't help. I can't put anything too thick or otherwise my truck won't fit.

y5azazah.jpg
 

J DAMAGE

Full Access Member
Joined
Jul 15, 2012
Posts
880
Reaction score
505
Location
NJ
Put the leftover insulation to good use. My front bumper is all scratched up from having to hit my garage wall in order to fit my Raptor. I put cardboard on the wall but it didn't help. I can't put anything too thick or otherwise my truck won't fit.

y5azazah.jpg

Glue the insolation strips to the wall, not to ugly up the truck, also the bumper pads LEFT AND RIGHT of your light bar stick out further than your location of the insolation, Just my 2-cents.
 

Forum statistics

Threads
95,505
Posts
2,010,343
Members
59,113
Latest member
SK Raptor R
Top