What did u do to your raptor today?

[MrVeteran51248]

F'd around with headlights today. Raptor had HID's in it from original owner. Had tons of problems with those. Ripped them out and replaced with these last October before a long trip. These came with Halogen bulbs.

View attachment 483228

The day @Gumby I installed them, the high-beam on the passenger side didn't work, but everything else did. I could live with that for the trip.

3 months later, now the high-beam works on the passenger side, but the low-beam on the driver side won't activate. WTF?!?!?!?!!!!!!!

Spent a couple hours ******** around with it today. Can't figure it out. Ordered some new halogen bulbs. Be here tomorrow.

I was having some issues with the passenger side not having the bright for a bit then neither would work, i messed around with if for a little while and have discovered that 2 of the metal plugs had some corrosion on them. I eneded up disconnecting the battery and removing the divider on the female side of the plug. I used a set of dental picks, and a tiny file to clean them up and tighten then back up. So far, no issue. If it continues I might just replace both truck and light connections.

 

[Big Blue]

It made 573 rwhp/520 tq and they still have to install the FP throttle body. JDM said that's about 725 HP now and expect another 20-25 with TB.

View attachment IMG_3257.MOV

 

[New recaros]

It made 573 rwhp/520 tq and they still have to install the FP throttle body. JDM said that's about 725 HP now and expect another 20-25 with TB.

View attachment 483475

That’s a lot of HP for that model A raptor!

 

[Irregular F150]

I rinsed it off when i got to work. Probably gonna have frozen doors when i leave LOL