What did u do to your raptor today?

[Skyfrog]

I wanted to get a good Fire Extinguisher, so I purchased one that I also keep in my airplane. It's pure Halon so it's OK for humans (and other people on this forum) and leaves no residue. Unfortunately, they stopped making Halon because it's bad for the ozone, so they are hard to find. However, they are still available at: https://www.aircraftspruce.com/catalog/pspages/c352tsc.php?clickkey=11303

Now I need a way to mount it...

 

[Aaron]

Drove 930 miles from NYC to Roseville, MI for some nostalgic "digital mud graphics" for my Gen2 Raptor!! Design and install by RappyGraphics.com -Josh Yiatras!!


Sent from my iPhone using Tapatalk

Digging the throwback graphics man, it's a good look!

 

[hkguns]

I wanted to get a good Fire Extinguisher, so I purchased one that I also keep in my airplane. It's pure Halon so it's OK for humans (and other people on this forum) and leaves no residue. Unfortunately, they stopped making Halon because it's bad for the ozone, so they are hard to find. However, they are still available at: https://www.aircraftspruce.com/catalog/pspages/c352tsc.php?clickkey=11303



Now I need a way to mount it...

I wrapped some industrial grade Velcro around mine and stuck it to the bottom of the back seats.

 

[SZDZMTR]

Installing Horn Blasters.
Everything is out of the way and away from elements. I certainly did not like the idea of frame mounts and what not. My in house mechanic is awesome.

 

[ogdobber]

Plugs are pretty straight forward. Just take your time and you'll be ok. Here is the process I followed:

1. Check the gap on all the new plugs. They do come pre-gapped but I checked them anyways. .041-.047 IIRC.

2. Just do one plug at a time. When putting in the new plug, put a little nickel based anti seize on the threads and run the plug in BY HAND.

3. Torque to 106 in lbs.

4. Put a dab of dielectric grease in the plug boot.

5. Install plug boot onto plug.

6. Repeat steps until your done.

Ive linked the things I used below. The swivel socket helped a lot. It is also magnetic so you don't have to worry about the rubber boot staying on the plug.

https://www.amazon.com/gp/product/B007NJOEAI/?tag=fordraptorforum-20

https://www.amazon.com/gp/product/B000AL8VD2/?tag=fordraptorforum-20

https://www.amazon.com/gp/product/B0014ZVSVK/?tag=fordraptorforum-20



My truck has 50,800 on it right now. EDIT: See below for changing interval.

Thanks for the link on the (raptor) plug wrench, makes it much easier. Just did mine. Took 2.5 hours... Pretty straight forward, just 16 of them [emoji23]. My truck is 88k, i could've made it easily to 100k. Gap was on the old ones at 46-47 gapped the new to 42


Sent from my iPhone using Tapatalk Pro

 

[Leonidas]

I wanted to get a good Fire Extinguisher, so I purchased one that I also keep in my airplane. It's pure Halon so it's OK for humans (and other people on this forum) and leaves no residue. Unfortunately, they stopped making Halon because it's bad for the ozone, so they are hard to find. However, they are still available at: https://www.aircraftspruce.com/catalog/pspages/c352tsc.php?clickkey=11303

Now I need a way to mount it...

I put my halon extinguisher in the tray under the rear seat. Fit perfectly.

 

[SZDZMTR]

RPG Reservoir and Derail Cooler are in place.

 

[SZDZMTR]

New front brakes






WTF I thought I was done with this truck for a while...

 

[dlbb]

I wanted to get a good Fire Extinguisher, so I purchased one that I also keep in my airplane. It's pure Halon so it's OK for humans (and other people on this forum) and leaves no residue. Unfortunately, they stopped making Halon because it's bad for the ozone, so they are hard to find. However, they are still available at: https://www.aircraftspruce.com/catalog/pspages/c352tsc.php?clickkey=11303

Now I need a way to mount it...

https://www.f150forum.com/f122/bed-...-prototypes-complete-pre-order-monday-384549/

i'm waiting for these to drop to mount an extinguisher and maybe some maxtrac on the other side.

opps sorry i forgot i hang in the gen one section sometimes lol.

 

[SZDZMTR]

https://www.f150forum.com/f122/bed-...-prototypes-complete-pre-order-monday-384549/

i'm waiting for these to drop to mount an extinguisher and maybe some maxtrac on the other side.

opps sorry i forgot i hang in the gen one section sometimes lol.

Its a unisex thread