What did u do to your raptor today?

[Redrap22]

OSHA does not approve

Hahaha, probably not. The stripper pole pocket makes a very good chock for the ladder though.

 

[highpowernut]

Hahaha, probably not. The stripper pole pocket makes a very good chock for the ladder though.

Yes it does

 

[SilentShooter]

Got notification that my order for a Baja Designs 60" Arc racer bar was sent to BD for drop shipment. So now I get to wait for slow shipping from Cali to FL to find out if the Free wire harness that was part of the Black Friday deal is going to be the correct dual power harness needed for the 60" bar.

Also got notification from PCI Radios that the replacement whip for my antenna was shipped, now just waiting on notification for the two amber rock covers for my XL80's to ship. This year I did not go crazy on parts unlike last year (Due to the fact that I still have not installed parts I bought last year.. )

Lets see what I can get done before snoball while still dealing with the house renovations.

 

[R1jamn]

I've had more time to work on the Raptor lately.
Added sleeves to vulnerable areas of the speed sensor/ABS cables.
Applied dielectric grease to rear locker connector, fuel control module connector and the towing harness connectors.
Checked the spare tire pressure.










Rear Locker Connector on rear differential housing



Fuel Control Module on top of a cross member behind the axle







Towing Harness Connctors.
FoMoCo had applied dielectric grease to these from factory already.
I added more.





Spare tire was at 31 psi.
Filled it to 44 psi

 

[BajaTaxi]

Finally got it back from the second round of paint yesterday. A big thanks to @Hole Shot for the advice and help with fender liner install.

 

[Yukon Joe]

I've had more time to work on the Raptor lately.
Added sleeves to vulnerable areas of the speed sensor/ABS cables.
Applied dielectric grease to rear locker connector, fuel control module connector and the towing harness connectors.
Checked the spare tire pressure.










Rear Locker Connector on rear differential housing



Fuel Control Module on top of a cross member behind the axle







Towing Harness Connctors.
FoMoCo had applied dielectric grease to these from factory already.
I added more.





Spare tire was at 31 psi.
Filled it to 44 psi

Some of those connections are such a pain to get pulled apart.
Good job for doing it though. Will save you in the long run.
@Yukon Joe
Drive your raptor here!!!!
www.runraptorrun.com
( * Y * )

 

[John813]

I don't know why I can't pull the trigger on Methods.
Was about to buy them, then just closed the tab

Guess I'm deep down waiting for a set of SVT beadlocks to pop up cheap locally or something. Fuel wheels never seem to be on sale too.

 

[Hole Shot]

Finally got it back from the second round of paint yesterday. A big thanks to @Hole Shot for the advice and help with fender liner install. View attachment 81943View attachment 81944View attachment 81945View attachment 81946

Any time brother !!!!

 

[SZDZMTR]

Put my ladder on the tailgate to help finish hanging some lights.

that's how Santa sneaks through the chimney...

 

[impactbumper]

Replaced my center caps with these and black lugs on my Methodrace NVs


Sent from my iPhone using Tapatalk