Uneven Exhaust tips....easy Fix!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Big Blue

Administrator
Staff member
Admin
Supporting Member
Joined
Aug 1, 2011
Posts
4,276
Reaction score
7,629
Location
USA
Hi all,

I noticed my exhaust tips were not even/level with each other a few months back. I offroad my beast and it's no show truck, but it started to nag on me. I have seen other posts here saying the same, one side is higher/lower than the other.

So today I jumped under the truck and 5 minutes later....Fixed. Super easy solution. The rear bracket is adjustable. Simply loosen both 10MM nuts with deep socket (Pics 1). No need for wrench on other side (see pic 2) of bracket. Lift or lower exhaust to desired position with one hand and tighten bracket nuts with the other. Done. (Pic 3)

IMG_0017.jpg IMG_0018.jpg IMG_0020.jpg
 

James L

Member
Joined
Jul 26, 2019
Posts
1
Reaction score
1
Location
Manitoba
You know I saw that right away! Then I looked at others and they seemed all like that with one side higher.
I appreciate this and I will be crawling under tomorrow!
 
Top