TurboSmart EM BOV

[Biggwrm]

Speaking of the install...

Interesting. Didn’t realize regular 150s didnt have the fans.

i will definitely be trying not to completely remove the IC. Hoping i can just loosen the one side hose. The CVF has some weight to it.

 

[nikhsub1]

Anyone with an OEM IC that installs this BOV and does NOT upgrade the intercooler is an idiot.

 

[smgilles]

Speaking of the install...

Subscribed

 

[Jburns1122]

Anyone with an OEM IC that installs this BOV and does NOT upgrade the intercooler is an idiot.

Do you mean in terms of upgrading while you have the stock IC out?

 

[nikhsub1]

Do you mean in terms of upgrading while you have the stock IC out?

Yes. If you are gonna pull the entire IC out, might as well put a quality oem replacement (at the very least) while you are at it. The OEM IC is absolute garbage.

 

[Pure745]

Yes. If you are gonna pull the entire IC out, might as well put a quality oem replacement (at the very least) while you are at it. The OEM IC is absolute garbage.

Which one would you put in?

It pains to me like the sound of this BOV so much

 

[nikhsub1]

Which one would you put in?

It pains to me like the sound of this BOV so much

Not sure, I have the Full Race - I've never researched OEM replacements just because IMO the FMIC is far superior. With that said, a good bar and plate IC in the stock location will do miles better than OEM.

 

[Biggwrm]

Well mine showed a day early.. nice looking piece. Seems pretty easy to push up on the plunger. Im hoping when its energized it has more force holding it down.
Im going to attempt to swap it as easy as possible, if i didnt have the damn skid plate it might already be done. I see the factory BOV has a couple screws on it, playing with the idea of unscrewing it to see if in two pieces it’s easier to pull out.
Will report back when I have an update.

 

[Paul Tomlinson]

Installed today on a 2018 with Cobb FMIC and ADD pro front bumper. It really fits great and opens up oil filter access. I chose to shorten the blocked off stock breather hose. I wish they made a plug that would go straight onto the intake pipe.
Started her up but no driving impressions yet. Seems like a well made solid unit.

I just picked up my TurboSmart BOV EM in Sydney. Looking forward to getting it on the truck. I have a similar setup with the Cobb FMIC. Any tips on getting the valve in there? Did you just cut the breather hose and leave it or did you tie it up somewhere?

 

[Mbdurham]

Mine is going to be delivered tomorrow. Will install this weekend


Sent from my iPhone using Tapatalk Pro