Trimming

[Jake Rehberger]

So I’m new to posting in the forum as I just got my Gen3 last week. I’ve been trying different searches and can’t find what I’m looking for. Hoping someone can help.

I got new wheels and tires.
4WP t-series 0 offset
37x12.5 Mickey Thompson BB A/T
1.5” mammoth wheel spacers
1.5” RPG perch Collars
1” Foutz Rear Shock Spacer

Adjusted the Caster to +4.9 degrees.

I’m still rubbing on the inside screw that holds the flare down and the tire is also pulling my fender liner out everytime I turn.

I’m ready to do some trimming, but I wanted any advise and/or pictures of what people have done. Even a link to a previous thread would be great.

Thanks in advance.

 

[jchap711]

Bro. Take the wheel spacer off

 

[DFS]

Wow the solution here is simple. Take the spacer off the brodozer and your rubbing goes away

 

[Oldfart]

You need the 4" spacers with that wheel.

 

[Jakenbake]

0 offset plus a spacer is putting that wheel out there pretty far.

 

[Yoshi]

You need the 4" spacers with that wheel.

and a 4in bds lift kit

 

[mashtastic]

Why

 

[TrailRunner]

Recommend looking into larger fenders. They’ll clear bigger tires and fiberglass/carbon fiber fenders weigh less. Win-win!

2021-2022 Ford Raptor Fenders

Bulge Rise 2.5" 1" Works With Your Factory Hood, Valance & Headlights Reuses The Factory Hardware CAD Designed & CNC Cut Retains The Factory Marker Lights, Sensors & Vents Fender Liners Available Comes Standard In White Gelcoat The Pricing Is For The Pair

www.fiberwerx.com

 

[CoronaRaptor]

@Nex check out the rubbing.

 

[Nex]

Welcome to FRF.

As was stated above, take the wheel spacers off and retest. I have zero offset 37s on my Gen 2 and Gisers up front. Gen 3 *should* fit 37s without trimming. The problem is zero offset wheels AND a 1.5" spacer.