SVC 1.5" Collars - Impressions

[cdiddy4224]

Thanks for the info. I don't want to go into forscan without knowing the correct modules or value that i should be modifying. Hopefully someone will have info on that soon.

 

[flyingrick13]

I just did the RPG 2.25 to my Gen 3 35 truck. The ride is still smooth as butter with now 37s! Also is spot on level. Make sure the shop resets the live valves though! That is a huge step that needs to be done.

 

[Bill Giles]

I do not get the appeal of raising the front end.

 

[cdiddy4224]

I just did the RPG 2.25 to my Gen 3 35 truck. The ride is still smooth as butter with now 37s! Also is spot on level. Make sure the shop resets the live valves though! That is a huge step that needs to be done.

Any idea if you shop used the reset method used for the Gen 2s?

 

[flyingrick13]

I do not get the appeal of raising the front end.

Clearance. Approach angle. Wheel fitment. Tire size. Ride quality.

 

[flyingrick13]

Any idea if you shop used the reset method used for the Gen 2s?

They did. Software wise, nothing has changed for the reset. The reset recenters the solenoids for a new 0.

 

[cdiddy4224]

They did. Software wise, nothing has changed for the reset. The reset recenters the solenoids for a new 0.

Well I just tried it through forscan and the ride calibration isn’t there. You can see you current settings but nothing to let you recalibrate

 

[sixshooter_45]

Well I just tried it through forscan and the ride calibration isn’t there. You can see you current settings but nothing to let you recalibrate

Is yours a Gen3? I believe it's there for the Gen2.

 

[cdiddy4224]

Is yours a Gen3? I believe it's there for the Gen2.

Correct, only for Gen 2s. Currently only Ford can recalibrate Gen 3s with FDRS

 

[cdiddy4224]

I just posted over in the forscan Gen 3 thread that we can now adjust our ride height using forscan