Dentworx54
Member
I have had 3 gen 1’s and a gen2. Just got the gen 3. I have 400lbs of tool boxes in the back and it squats bad. The same boxes as what was in my gen1. Gen 3 payload is 150lbs more. Does anyone have the same issue
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I don't think the shock would cause the sagging. Sagging is caused by the coils. I think the OP would be looking into Heavy Duty Coils. With that comes a stiffer ride with no load.And I get the suspension differences. Its not my first rodeo but 400lbs should not make the *** end hang down especially with the extra payload. Fox is already having problems with failures and no warranty replacements until 2023 supposedly
ding ding ding we have a winner. lol you want a work truck buy a work truckThe raptor is not a work truck which is why F150's still have leafs and only raptor has coils
Well... leafs are used because they are cheap... at least on the lighter duty trucks. Dodge/Ram has had coils on them for years. Coils can handle the load. Yes... I know... Raptor is not a work truck and I generally agree, but with the right coils you could make due.The raptor is not a work truck which is why F150's still have leafs and only raptor has coils