Since Rappygraphics seems to be down, anyone else selling these?

[jikjak]

any luck finding the raptor outline sticker? mine got torn up a bit when offroading and id like to get another one as well

 

[Raptorguy1]

You're point is?

 

[Lwlandy]

I had Rappy Graphics decals on the rear F150 and Raptor badges but after a few washes I noticed that the edges were lifting up in places. I think it could have been as a result of me not getting them lined up perfectly but I decided to remove them as they were looking a little tattered up close.


I went a slightly different route to achieve similar result. I purchased the stainless steel emblems and then painted them in Electric orange and 2K clear. Electric Orange is a close match to the orange color used on the factory Bead lock beauty rings but is a pearl metallic so gives similar effect to the reflective decals which is what I wanted.

Bad pic, but you can probably see the effect from the camera flash.

 

[Riddick]

I’ve bought a couple of items from these guys. Really can’t tell the difference in quality compared to Rappy. They both use 3m products. Customer service was spot on for me.

https://www.rockymountaingraphics.com

Looks like they have something similar to what your looking for.

 

[Edbert]

IMO Vinyl or pastidip is good for testing the appearance of an idea. See something you don't like peel it off and try again. Once you decide what you like then paint or powdercoat is a better idea.

That said...do the stickers for a Raptor with the tailgate applique use the same bits as one with the delete option?
edit: obviously I do not mean the "F O R D" lettering on the tailgate.

 

[Raptorguy1]

I had Rappy Graphics decals on the rear F150 and Raptor badges but after a few washes I noticed that the edges were lifting up in places. I think it could have been as a result of me not getting them lined up perfectly but I decided to remove them as they were looking a little tattered up close.


I went a slightly different route to achieve similar result. I purchased the stainless steel emblems and then painted them in Electric orange and 2K clear. Electric Orange is a close match to the orange color used on the factory Bead lock beauty rings but is a pearl metallic so gives similar effect to the reflective decals which is what I wanted.

Bad pic, but you can probably see the effect from the camera flash.

That looks really good. Where did you get those and the paint?

 

[Lwlandy]

https://www.cjponyparts.com/america...view&containerId=BVContainer&productId=772065 : Stainless badges. Not the cheapest option as I only used the outer section not the inner. I already had the paint from another project. Electric Orange is a Ford European spec standard paint used on the focus ST.

 

[hkguns]

RappyGraphics are back online. Surprised I didn't find an announcement on here. This is really good news.

 

[FordPerf Addict]

OPEN FOR BIZ

already ordered a black and grey American flag of the aux plug cover and the engine start button


Sent from my iPhone using Tapatalk