SDHQ Offroad OEM Bump Stop Plates WITH RPG traction bars???

[Zeusmotorworks]

I'm sure most who have the RPG traction bars also have the hydro/pneumatic bumps, but thought I'd ask. I've finally found enough axle wrap (in our sand island in our park of all places) to warrant a solution. The Deavers hook up well enough on pavement, but strangely I get more grief in the sand. Anyone running the RPGs traction bars with SDHQ Offroad OEM Bump Stop Plates (already have plates with Deavers)? I think its an impossibility, both may occupie the same space but not sure.

 

[WillieFlo]

I am curious about this as well because I have Icon leafs, the SVC hydro bumps, and will finally be having my RPG track bars installed next week. Hydro bumps came with strike plates, but now the RPG track bars replace those. Curious how that swaps out.

 

[Psirus7]

Can you let us know how the SVC bump kit works out with the RPG Track-Bars? I'm looking at the same setup! Thanks.

 

[ruey220]

Any updates?

 

[Zeusmotorworks]

Got sidetracked with life and other 50 hobbies.

 

[Old-Raptor-guy]

I believe in talking to RPG the last couple days on modifications I am doing the traction bars either come with new strike plates that incorporate the connecting points for the bars or you purchase them separately. So if you have air bumps already you will have to remove ubolts lower rear axle a couple inches and swap strike plates.
I am getting their strike plates so that I can do the traction bars in the near future without having to disassemble again.

 

[BSouders80]

I'll post some pictures of this here in a week or so. I ran into the problem of RPG traction bars and adding a KHC bump stop kit. Two plates and not enough length on the pins on the bottom of the shocks to run both. I figured out that RPG has a replacement plate that has the strike plate made into their new plate. It's supposed to be on it's way. I'll post once installed.